Bedienungsanleitung Tissot TOUCH SILEN-T (Seite 4 von 4) (Englisch)

593102

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Silen-T

www.tissot.ch

137_EN / 06.12

4/4

Synchronization

This operation can only be performed visually, and it enables you to synchro-

nize the hands to the vibration signals. To do this:

– Press the button (3) for more than 2 seconds.

– Sense a first vibration.

– By holding your finger down on the button (3), sense a second vibration

after 10 seconds.

– Position the hour hand at 12 o'clock by placing a finger on the crystal (5) at

9 or 10 o'clock to move the hour hand anticlockwise or at 2 or 3 o'clock to

move the same hand in a clockwise direction.

– Position the minute hand at 12 o'clock by placing a finger on the crystal (5)

at 7 or 8 o'clock to move the minute hand anticlockwise or at 4 or 5 o'clock

to move the same hand in a clockwise direction.

Please note: After 10 seconds when the Silen-T is not in use, the hands

once again show the correct time and a single press on the button (3) acti-

vates the touch-sensitive crystal (5), regardless of the function previously

used. After 8 minutes of operation without the button (3) being pulled out, the

Silen-T moves into " standby " mode (power-saving mode).

Care and maintenance

We would advise you to clean your watch regularly (except for the leather

strap) using a soft cloth and warm soapy water. After immersion in salty

water, rinse it in fresh water and leave it to dry completely.

Ensure that you do not leave it to dry in places subject to great variations in

temperature and humidity, in direct sunlight or near strong magnetic fields.

TISSO

quartz watches benefit from the incomparable precision of quartz

movements. Their power reserve usually enables them to operate for more

than 2 years in continuous use. If you ever plan not to be wearing your watch

for a period of several weeks, or even several months, we would advise you

to pull out the button before putting your watch away (3). This reduces the

level of electrical power drawn off by the motor, thereby substantially exten-

ding the service life of the batteries.

Replacing the batteries

When your batteries are approaching the end of their useful service life,

this is signalled to you with two vibrations each time you handle the watch.

The first of these is short, and the second is longer (E.O.L. function).

The 2 batteries need to be replaced simultaneously without delay by either

a retailer or an official

TISSO

agent.

Battery type: button-type lithium-manganese dioxide primary battery cell,

Renata 350, 1,55 V, Ø 11,60 mm, h. 3.6 mm.

Collection and treatment of end of life quartz watches*

This symbol indicates that this product should not be disposed with

household waste. It has to be returned to a local authorized col-

lection system. By following this procedure you will contribute to

the protection of the environment and human health. The recycling of the

materials will help to conserve natural resources.

* valid in the EU member states and in any countries with corresponding

legislation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tissot TOUCH SILEN-T Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tissot TOUCH SILEN-T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info