Bedienungsanleitung Tomado TM-1935 (Seite 15 von 19) (Holländisch)

488870

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

y When the indicator light goes off, the required temperature is reached. The iron is

ready for use.

y To turn off the iron, turn the temperature regulator counter-clockwise to position

“ OFF ”, set the iron upright, and pull out the power plug.

STEAM IRON

y Fill the water tank, as described under before initial usage.

y Steam ironing can be used in the temperature ranges ., .., … MAX. For a reliable

functioning of the steam function, the water tank must be filled to at least 1/4.

y Spraying function: Press the spray button to moisten a spot to be ironed. Water will

came out of the spray nozzle.

y Steam Function: Turn the steam control knob to the required position, steam starts

coming out from the holes in the soleplate.

y Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator

light will goes off when the required temperature is reached then press the burst of

steam button . This function provides an extra amount of steam to remove stubborn

wrinkles.

y Push the extra steam button to remove stubbed creases. Wait a couple of seconds

before pressing this button again.

y The iron surface must always be kept in an upright position.

y To turn off, turn the temperature regulator counter-clockwise to “ OFF ” and pull out

the power plug.

y Turn the appliance upside down and carefully pour the remaining water out of the

water tank. Carefully shake the appliance.

y Press the spray button to allow possible remaining water to come out more easily.

Notice: With conventional steam ironing, water may leak from the soleplate if a too

low temperature has been selected. If this happens, turn the temperature regulator to

the advised position. Steam will recommence as soon as the appropriate temperature

has been reached.

SELF-CLEAN FUNCTION

You can use the self-clean function to remove scale and impurities.

Use the self-clean function once every two weeks if the water in your area is very hard.

The self-clean function should be used more frequently.

z Make sure the appliance is unplugged.

z Set the steam control knob to position “ 0 “.

z Fill the water reservoir via its opening.

z Select the maximum ironing temperature.

z Put the plug in the wall socket.

z Unplug the iron when the temperature indicator light goes off.

z Hold the iron over the sink, press and hold the self-clean button and gently shake the

iron. Steam and boiling water will come out of the soleplate. Impurities and flakes (if

any) will be flushed out.

z Release the self-clean button as soon as all water in the tank has been used up.

z Repeat the self-clean process if the iron still contains a lot of impurities.

CLEANING

y Before cleaning the Iron ensure it is disconnected from the power supply and has

completely cooled down.

y Deposits on the soleplate may be removed with a rough cloth soaked in a vinegar

water solution.

y The casting may be wiped with a damp cloth and then polished with a dry cloth.

y Do not use abrasives on the soleplate.

y Keep the soleplate smooth. Avoid hard contact with metal objects.

TECHNICAL DATA

Type nr: TM-1935

Power: 2200W

Supply voltage: 220-240V~50Hz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tomado TM-1935 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info