Bedienungsanleitung Toolson DKS1600 (Seite 18 von 240) (Alle Sprachen)

782195

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

18 GB

1. Introduction

Manufacturer:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating

the machine and carefully follow its information. The

machine can only be operated by persons who were

instructed concerning the operation of the machine

and who are informed about the associated dangers.

The minimum age requirement must be complied

with. In addition to the safety requirements in these

operating instructions and your country’s applicable

regulations, you should observe the generally rec-

ognized technical rules concerning the operation of

woodworking machines.

We accept no liability for damage or accidents which

arise due to non-observance of these instructions

and the safety information.

2. Safety information

Caution

Read all the safety information and instructions.

Any errors made in following the safety information

and instructions may result in an electric shock, re

and/or serious injury.

Keep all safety information and instructions in a safe

place for future use.

2.1 General safety information on electric power

tools

Important. The following safety precautions must

be taken when using electric power tools in order to

protect the user from electric shocks and the risk of

injury and re. Read and follow these instructions be-

fore using the equipment.

1 Keep your work area tidy

-Untidy work areas can result in accidents.

2 Check the ambient conditions

-Do not expose electric tools to rain. Never use

electric power tools in damp or wet locations.

Provide good lighting. Do not use electric power

tools near ammable liquids or gases.

3 Protect yourself against electric shocks

-Avoid bodily contact with earthed parts, e.g.

pipes, radiators, cookers and refrigerators.

4 Keep children away

-Do not allow other persons to touch the tool or

cable, keep them away from your work area.

5 Keep your electric power tools in a safe place

-Unused tools must be stored in a dry, locked

room out of children’s reach.

6 Do not overload your tools

-They will work better and more safely within their

specied capacity range.

7 Use the right tools

-Do not use tools or attachments which are too

weak for heavy duty work. Never use tools on

jobs for which they are not intended; for exam-

ple, do not use a hand-held circular saw to fell

trees or lop off branches.

8 Wear suitable work clothes

-Never wear loose ttings clothes or jewelry.

They may get caught in moving parts. Rubber

gloves and non-slip shoes are recommended

when working outdoors. Wear a hair net if you

have long hair.

9 Use personal safety equipment.

-Wear safety goggles. Use a dust mask when

working on dusty jobs.

10 Do not use the cable for purposes other than that

for which it is designed.

-Do not carry the equipment by the cable and do

not use the cable to pull the plug out of the sock-

et. Protect the cable from heat, oil and sharp

edges.

11 Secure the workpiece

-Use clamps or a vise to secure the workpiece.

This is safer than using your hand and also ena-

bles you to operate the machine with both hands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toolson DKS1600 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info