Bedienungsanleitung Toolson FS 920 PRO (Seite 19 von 56) (Deutsch, Englisch, Schwedisch, Finnisch)

781909

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

19GB

The operators

Healthy commonsense and caution are factors that can-

not be integrated in a machine. These factors are the re-

sponsibility of the operator.

Please consider the following:

Prevent body contact with grounded surfaces such as

pipes and radiators. Please be watchful. Do not work at

the machine if you are tired.

Always wear:

• ANSI- approved dust masks.

• Safety glasses

• Hearing protection.

Do not stretch yourself over running machines.

ADDITIONAL INSTRUCTIONS

FOR LEAKAGE CURRENT CIRCUIT-BREAKER.

Please observe the following important instructions on

start-up and handling.

Pay attention to the instructions even if you hand over

the product to a third party. Preserve this operating In-

structions manual for subsequent reference.

SAFETY INSTRUCTIONS!

• Arbitrary alteration and/or modication of the product

is not allowed for safety- and approval reasons (CE).

Never dismantle the product.

• The product is not suitable for handling by children.

Children cannot assess the risks involved in handling

electrical devices. Therefore, pay special attention to

the presence of children.

• The structure of the product corresponds to Protec-

tion Class 1. Only a proper mains socket with an earth

wire (230V~/50Hz) of the public power supply should

be used.

• In industrial equipment, the Accident Prevention Spec-

ications of the Federation of Trade Associations for

Electrical Systems and Resources must be observed.

• In schools, training centres, hobby- and self-help work-

shops, the operation of the product must be monitored

responsibly by trained staff.

• Handle the product carefully. Impacts, hits and drops

from even low heights can damage the machine.

• Never use the product if it is brought from a cold to a

hot room. Under certain circumstances, the resulting

condensed water can destroy the product.

• Let the product come to the room temperature, before

connecting it to the mains power supply. Under certain

circumstances, this can take several hours.

• Do not hold the product with moist or wet hands.

• Ensure that the Insulation of the entire product is nei-

ther damaged nor destroyed.

• If the product is not operated over long periods, dis-

connect it from the mains power supply, pull the plug

out of the socket.

• Avoid the following environmental conditions at the in-

stallation site or during transport.

• Wetness or very high humidity. Extreme cold. Dust or

combustible gases, vapours or solvents. Strong vibra-

tions.

• Strong magnetic elds as in the vicinity of machines or

loudspeakers.

Attention: Laser radiation

Do not stare into the beam

Class 2 laser

Protect yourself and you environment from acci-

dents using suitable precautionary measures!

• Do not look directly into the laser beam with unpro-

tected eyes.

• Never look into the path of the beam.

• Never point the laser beam towards reecting surfaces

and persons or animals. Even a laser beam with a low

output can cause damage to the eyes.

• Caution - methods other than those specied here can

result in dangerous radiation exposure.

• Never open the laser module. Unexpected exposure

to the beam can occur.

• If the mitre saw is not used for an extended period of

time, the batteries should be removed.

• The laser may not be replaced with a different type

of laser.

• Repairs of the laser may only be carried out by the

laser manufacturer or an authorised representative.

6. Technical data

Dimensions L x W x H 1560 x 440 x 1140mm

Cutting table 400 x 1290 mm

Diamond cutting

disc Ø 200 mm

Water lling quantity 30,0 l

Weight 50 kg

Section data

Max. cutting length 920 mm

Max. diagonal cutting

length 650 x 650 / 850 x 850 mm

Max 90° cutting height 36 mm

Max. 45° cutting height 29 mm

Drive

Motor 230 V/50 Hz

Power intake 900 W

Motor speed 3000 1/min

Insulating material

class F

Protection type IP54

Technical changes reserved!

NOISE CHARACTERISTIC VALUES

Noise at the workplace can exceed 85 dB (A). In this

case, noise protection measures are necessary for the

user (wear hearing protection!).

NOISE OUTPUT IN dB

sound power level of LWA = 86 dB (A) uncertainly 3 dB (A)

Noise pressure level LPA = 72 dB (A) uncertainly 3 dB (A)

according to DIN EN ISO 3744; EN ISO 11201

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toolson FS 920 PRO Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info