782362

Toolson KGZ2550PRO Seite 22

22
Zoom out
Zoom in
Vorherige Seite
1/296
Nächste Seite
22 GB
12 Secure the workpiece
–Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held more
securely than with your hand.
–An additional support is necessary for long work-
pieces (table, trestle, etc.) in order to prevent the
machine from tipping over.
–Always press the workpiece rmly against the
working plate and stop in order to prevent bounc-
ing and twisting of the workpiece.
13 Avoid abnormal posture
–Make sure that you have secure footing and always
maintain your balance.
–Avoid awkward hand positions in which a sudden
slip could cause one or both hands to come into
contact with the saw blade.
14 Take care of your tools
–Keep cutting tools sharp and clean in order to be
able to work better and more safely.
–Follow the instructions for lubrication and for tool
replacement.
–Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
–Check extension cables regularly and replace them
when damaged.
–Keep the handle dry, clean and free of oil and grease.
15 Pull the plug out of the outlet
–Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
–During non-use of the electric tool or prior to main-
tenance and when replacing tools such as saw
blades, bits, milling heads.
–When the saw blade is blocked due to abnormal
feed force during cutting, turn the machine off and
disconnect it from power supply. Remove the work
piece and ensure that the saw blade runs free. Turn
the machine on and start new cutting operation
with reduced feed force.
16 Do not leave a tool key inserted
–Before switching on, make sure that keys and ad-
justing tools are removed.
17 Avoid inadvertent starting
–Make sure that the switch is switched off when
plugging the plug into an outlet.
18 Use extension cables for outdoors
–Only use approved and appropriately identied
extension cables for use outdoors.
–Only use cable reels in the unrolled state.
19 Remain attentive
–Pay attention to what you are doing. Remain sen-
sible when working. Do not use the electric tool
when you are distracted.
20 Check the electric tool for potential damage
–Protective devices and other parts must be care-
fully inspected to ensure that they are fault-free and
function as intended prior to continued use of the
electric tool.
–Check whether the moving parts function faultless-
ly and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions
must be fullled to ensure fault-free operation of
the electric tool.
–The moving protective hood may not be xed in
the open position.
–Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is specied
in the operating manual.
–Damaged switches must be replaced at a customer
service workshop.
–Do not use any faulty or damaged connection ca-
bles.
–Do not use any electric tool on which the switch
cannot be switched on and off.
21 ATTENTION!
–Exercise elevated caution for double mitre cuts.
22 ATTENTION!
–The use of other insertion tools and other acces-
sories can entail a risk of injury.
23 Have your electric tool repaired by a qualied elec-
trician
–This electric tool conforms to the applicable safety
regulations. Repairs may only be performed by an
electrician using original spare parts. Otherwise
accidents can occur.
ADDITIONAL SAFETY INSTRUCTIONS
1 Safety precautions
–Warning! Do not use damaged or deformed saw
blades.
–Replace a worn table insert.
–Only use saw blades recommended by the manu-
facturer which conform to EN 847-1.
–Make sure that a suitable saw blade for the mate-
rial to be cut is selected.
–Wear suitable personal protective equipment. This
includes:
–Hearing protection to avoid the risk of becoming
hearing impaired,
–Respiratory protection to avoid the risk of inhal-
ing harmful dust,
–Wear gloves when handling saw blades and
rough materials. Carry saw blades in a con-
tainer whenever practical.
–Wear goggles. Sparks generated during work or
splinters, chippings and dust coming from the
device can lead to loss of eyesight.
–Connect a dust collecting device to the electric tool
when sawing wood. The emission of dust is inu-
enced, among other things, by the type of material
to be processed, the signicance of local separation
(collection or source) and the correct setting of the
hood/guide plates/guides.
–Do not use saw blades made of high-speed alloy
steel (HSS steel).
… 22 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toolson KGZ2550PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info