Bedienungsanleitung Toolson TS6000 PRO (Seite 21 von 200) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

782529

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

21 І 200

Technical Data

AC motor 220-240 V~ 50Hz

performance 2000 Watt

operating mode S6 20%*

Idle speed 4800 min-1

Hard-metal blade ø 255 x ø 30 x 2.8 mm

Number of teeth 60

Thickness riving knife 2.5 mm

table size 640 x 640 (990) mm

Cutting height max. 90° 75 mm

Cutting height max. 45° 50 mm

height adjustment 0 - 75 mm

saw blade swivel 0 - 45°

suction port ø 40 mm

weight 31.5 kg

* operating mode S6 20%: Continuous operation with in-

termittent loading (playing time 10 min).

Engine protection of to hot warming up:

It´s allowed to run the engine with nominal power maximum

20% of playing time. After this the machine must run 80% of

playing time steadily without load.

Noise values

The total noise values determined in accordance with

EN 61029.

sound pressure level LpA 92.6 dB(A)

uncertainty KpA 3 dB

sound power level LWA 105.6 dB(A)

uncertainty KWA 3 dB

Wear hearing protection.

The effects of noise can cause a loss of hearing. Total

vibration values (vector sum - three directions) deter-

mined in accordance with EN 61029.

Before starting the equipment

• The equipment must be set up where it can stand

securely.

• All covers and safety devices have to be properly t-

ted before the equipment is switched on.

• It must be possible for the blade to run freely.

• When working with wood that has been processed

before, watch out for foreign bodies such as nails or

screws, etc.

• Before you press the ON/OFF switch check that the

saw blade is tted correctly. Moving parts must run

smoothly.

• Before you connect the equipment to the power sup-

ply make sure the data on the rating plate are dentical

to the mains data.

• Connect the machine to a properly installed protec-

tive contact socket, with at least 16A circuit breaker.

Attachment

Important. Pull out the power plug before carrying

out any maintenance, resetting or assembly work on

the circular saw!

Place all parts supplied on a at surface. Grouping

equal parts.

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair active

or passive medical implants under certain conditions. In

order to prevent the risk of serious or deadly injuries, we

recommend that persons with medical implants consult

with their physician and the manufacturer of the medical

implant prior to operating the electric tool.

SAFETY INSTRUCTIONS FOR THE HANDLING OF

SAW BLADES

1 Only use insertion tools if you have mastered their

use.

2 Observe the maximum speed. The maximum

speed specied on the insertion tool may not be

exceeded. If specied, observe the speed range.

3 Observe the motor / saw blade direction of rota-

tion.

4 Do not use any insertion tools with cracks. Sort out

cracked insertion tools. Repairs are not permitted.

5 Clean grease, oil and water off of the clamping

surfaces.

6 Do not use any loose reducing rings or bushes for

the reducing of holes on saw blades.

7 Make sure that xed reducer rings for securing the

insertion tool have the same diameter and have at

least 1/3 of the cutting diameter.

8 Make sure that xed reducer rings are parallel to

each other.

9 Handle insertion tool with caution. They are ideally

stored in the originally package or special contain-

ers. Wear protective gloves in order to improve

grip and to further reduce the risk of injury.

10 Prior to the use of insertion tools, make sure that

all protective devices are properly fastened.

11 Prior to use, make sure that the insertion tool

meets the technical requirements of this electric

tool and is properly fastened.

12 Only use the supplied saw blade for sawing opera-

tions in wood, materials similar to wood, plastics

and non-ferrous metals (except for magnesium and

alloys containing magnesium).

Residual risks

The machine has been built according to the state of

the art and the recognised technical safety require-

ments. However, individual residual risks can arise

during operation.

• Health hazard due to electrical power, with the use of

improper electrical connection cables.

• Furthermore, despite all precautions having been met,

some non-obvious residual risks may still remain.

• Residual risks can be minimised if the „safety instruc-

tions“ and the „Proper use“ are observed along with

the whole of the operating instructions.

• Do not load the machine unnecessarily: excessive

pressure when sawing will quickly damage the saw

blade, which results in reduced output of the machine

in the processing and in cut precision.

• When cutting plastic material, please always use

clamps: the parts which should be cut must always

be xed between the clamps.

• Avoid accidental starting of the machine: the oper-

ating button may not be pressed when inserting the

plug in an outlet.

• Use the tool that is recommended in this manual. In

doing so, your saw provides optimal performance.

• Hands may never enter the processing zone when the

machine is in operation. Release the handle button

and switch off the machine prior to any operations.

• Prior to any adjustment, maintenance or service work

disconnect the mains power plug!

Toolson TS6000 PRO Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info