Bedienungsanleitung Topcom Babytalker 3100 - KS 4231 (Seite 9 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

484003

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Babytalker 3100

ENGLISH

– The sounds picked up by the microphone are reproduced by the parent unit.

– The volume of the reproduced sound is indicated by the volume LEDs at the top of the parent unit.

The higher the volume, the more LEDs are on.

– An audible tone is generated when the maximum volume is reached.

– If no connection is established, a double beep tone is generated as a warning and the Link LED blinks.

– Reduce the distance between the parent and baby units until a new connection is established.

9.3 Finding the Parent Unit (Paging function)

– Press the Paging button on the baby unit and hold it pressed for at least 2 seconds before releasing

it.

– In response, the parent unit will emit a high-pitched tone for 30 seconds. This makes it easier to find the

parent unit.

– Briefly press the On /Off switch on the parent unit to switch off the tone.

9.4 NEMo Switch Setting

The Babytalker 3100 is based on the unique NEMo technology, which lets parents set

the radiated power of the equipment. See “6.4 No emission mode (NEMo)”.

If you want to have a quicker response you can turn the NEMo function OFF. By turn

OFF the NEMo function you will have always communication between the baby-and parent unit (even when there

is no noise).

To turn it ON/OFF:

– Turn off both parent- and baby unit.

– Slide the switch to ON or OFF at the back of baby unit.

– Power up both units (no need to concern which unit first)

9.5 Setting the Reproduction Volume of the Parent Unit

There are six volume settings.

– Press button to increase the volume.

– Press button to decrease the volume.

When you set the volume at the lowest setting the speaker will be turned off. Only the volume LED’s will lit when

noise is captured by the baby unit.

9.6 Switching the Night Light On and Off

– You can switch the night light on and off directly on the baby unit by pressing button .

10 Cleaning and Maintenance

This section contains important instructions for cleaning and maintaining the equipment.

Follow these instructions to ensure trouble-free use and prevent damage to the equipment due to improper

maintenance.

10.1 Safety Instructions

• If NEMo is turned ON and the baby unit picks up noise, it will take

about 3 seconds before the parent unit will turn on the speaker.

• If volume is turned off and maximum volume is captures by the baby unit, you will hear a

short beep to indicate this.

DANGER

Risk of fatal injury due to electric shock!

• Before cleaning the equipment, switch it off and unplug the power cable from the mains receptacle.

CAUTION

Risk due to leaking battery fluid

Fluid from leaking batteries (regular or rechargeable) can cause injuries (skin irritation) or damage to the

equipment. Wear safety gloves.

CAUTION

NEMO

OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Babytalker 3100 - KS 4231 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info