Bedienungsanleitung Topcom butler 131 (Seite 20 von 33) (Deutsch, Englisch, Holländisch, Französisch)

299622

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

36 37

6.5 Setting the ringing signal

6.5.1 Ring melody of the handset

• Press the Set button.

• Press <5>.

• The LCD display will show the current setting of the ring melody.

• Press “1”, “2”, “3” or “4” to set the desired melody.

• Press “5” to deactivate the ringing volume.

• The LCD display will show the change.

• Press the Set button to confirm entry.

6.5.2 Ring volume of base unit

The ringer volume of the base station can be set by means of a ringer volume

switch on the bottom of the base station. This switch allows you to change the

ringer volume (position I= silent, position II= normal, position III= loud).

6.6 Mute function

If you wish to talk to a third person without your correspondent hearing this con-

versation, you can temporarily turn off the microphone. Simply press the Mute

button. On the display the Mute symbol will appear. When you want to continue

the telephone conversation, press the Mute button again.

6.7 Hang-up function

Press and hold the Flash button for 2 seconds and the line will be broken for

about 2 seconds. By using the Hang-Up button, it is possible to make several

phone calls after each other without disconnecting the radio link between the

handset and the base station.

6.8 Redial

When you dialled a telephone number but did not receive an answer or the line

was busy, you can call this number again afterwards. The last 4 numbers dialled

are saved. When you wish to dial a number again, first press the Redial button a

few times until the desired number appears on the display and pick up the hand-

set. The telephone number is now automatically redialled.

6.9 Call transfer (flash) R

With the Transfer button - also called flash, recall or R button - you can transfer a

line to another telephone on your telephone exchange. The R button has a flash

function, this means that a short line interruption of 100 ms is being generated.

To set the interruption time, see 6.14 <R> Function programming

Consult the operating guide of your telephone exchange for a correct use of this

function. This button is sometimes also used for special services offered on your

public telephone line (f.i. call waiting function).

6.10 Memory numbers

The Butler disposes of 10 memory numbers (speed dial numbers). Each memory

place can store a telephone number of maximum 24 digits. You can call a memory

number by pressing the Memory button followed by the number of the memory

place (0-9) where the desired telephone number has been store d .

6.10.1 Storing memory numbers

• Press the Set button.

• Press the Memory button.

• The LCD display will show “[ ]“.

• Choose a memory place by pressing a numerical button (0-9).

• The LCD display will show the selected memory location.

• Enter the telephone number that you wish to store.

• Press the Set button.

You can also program a pause in the memory numbers. During the programming

of the memory numbers press the Redial button for a pause of 3 seconds

(’P‘ appears on the display).

6.10.2 Dialling a memory number

• Press the Memory button.

• Press the number of the memory place, where the telephone number has

been stored (0-9).

• Press the Line button and the telephone number is now automatically dialled.

6.10.3 Memory number preview

• Press the Memory button in standby mode.

• The LCD display will show “[ ]“.

• Press the memory location number (0-9).

• The corresponding telephone number will be displayed for 5 seconds, then the

phone returns to standby mode.

• If the memory location is empty, a fail tone will be generated.

Butler 131/136 Butler 131/136

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom butler 131 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info