Bedienungsanleitung Topcom deskmaster 125 (Seite 20 von 34) (Deutsch, Englisch, Holländisch, Französisch)

299670

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Deskmaster 125

4. SETTINGS ANSWERING MACHINE

4.1. DAY/TIME SETTING

Your digital answering machine mentions day and time of message entry during

playback. “Day” means the day of the week (Monday, Tuesday,…) and not the

date. Time is indicated according to the English am/pm system.

The machine is preset to: Monday, 12:00 am. You can check day/time setting at

any moment by pressing the CLOCK button. The machine will say its current set-

ting.

Proceed as follows to change the setting:

1. Press the CLOCK button for 1,5 seconds until the machine says which day it is

2. Press the FAST FORWARD button to select a following day or the REWIND but-

ton to choose an earlier day. Each time you press one of these buttons, the

machine says which day you have selected.

3. If you have reached the right day, press the CLOCK button to set the machine

to the selected day. Now the machine will say the hour to which it is set.

4. Press the FAST FORWARD button to select a later hour or the REWIND button

to select an earlier hour. Each time you press one of these buttons, the

machine says the hour you have selected.

5. If you have reached the right hour, press the CLOCK button to confirm the

selected hour. Now the machine will say the minutes after the hour to which it

is set.

6. Press the FAST FORWARD button to select a later minute setting or press the

REWIND button to select an earlier minute setting. Each time you press one of

these buttons, the machine says which minute setting you have selected.

7. If you have reached the right minute setting, press the CLOCK button to con-

firm the selected minute setting.

8. The machine will say the set day, hour and minutes to confirm your settings.

9. If, during one minute, no button is pressed, the machine will automatically

leave the setting mode and return to the previous mode.

b) Two touch memory (0..9)

-Pick up the handset.

-Press the Store button

-Enter the telephone number (max. 16 digits)

-Press the Store button

-Press a numerical key (0..9) to store the number under this key

3.4. MEMORY DIAL

a) One touch memory (M1,M2 and M3)

Pick up the handset and press M1, M2 or M3.

b) Two touch memory (0..9)

Pick up the handset and press the memory recall key.

Press one of the numerical keys (0..9).

3.5. SETTING THE RING VOLUME

The ring volume can be set by means of the ring volume switch : high, low and off.

3.6. PULSE /TONE SWITCHING DURING CALL

You have the possibility to switch to tone dialling.

You can use this function by pressing the * button immediately after having

dialled the desired telephone number in pulse dialling. The numbers that are

now entered are sent in tone dialling mode.

When you end the communication, the unit turns automatically to pulse dialling.

3.7. PAUSE BUTTON

Every time you push the Pause button, while dialling a telephone number, a

pause of 3,6 seconds is being added to the telephone number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom deskmaster 125 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info