Bedienungsanleitung Topcom deskmaster 125 (Seite 21 von 34) (Deutsch, Englisch, Holländisch, Französisch)

299670

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Deskmaster 125

5. OPERATION ANSWERING MACHINE

5.1. TWO ANSWERING MODES

You can register 3 outgoing messages: 2 for answering facility with possibility to

leave a message and 1 for the answering facility without possibility to leave a

message.

ANSWERING FACILITY WITH POSSIBILITY TO LEAVE A

MESSAGE

When the answering machine is in “answering mode with possibility to leave a

message”, it will answer calls after a certain number of rings and play outgoing

message 1 or 2. During playback of the outgoing message, “on” is on the dis-

play. The outgoing message will be followed by a long beep, after which the

caller can leave a message. When the registration time for the message (60

s e c.) is expired, the caller will hear “End of messages” and communication will be

broken.

ANSWERING FACILITY WITHOUT POSSIBILITY TO LEAVE A

MESSAGE

When the answering machine is in “answering mode without possibility to leave

a message”, it will answer calls after three rings and play outgoing message 3.

During playback of the outgoing message, “on” is on the display. After the outgo-

ing message the answering machine will break the communication. If no outgo-

ing message 3 is registered, the answering machine will not answer calls in this

mode.

SELECTING THE ANSWERING MODE

1. Hold down the ON button 1,5 seconds until you have the desired

answering mode (regardless of whether the answering machine is switched on

or off). An 1 & An 2 have the possibility to leave a message. An 3 does not

have this possibility.

2. Shortly press the ON button again to switch off the answering mode.

The machine will say “Answer off” and the LED is not lit.

4.2. SETTING THE SECURITY CODE

FOR REMOTE CONTROL

For remote control you first have to introduce a security code. The code is preset

to 123. However, we advise you to program a personal security code. The securi-

ty code must contain three digits. The symbols * and # are not accepted. You can

check the setting by pressing the CODE button. The machine will say the set

security code. You can only hear the security code at the machine itself, not

during remote control.

Proceed as follows to change the security code:

1. Press the CODE button 1,5 seconds until the machine says the first digit of the

set security code.

2. Press the FAST FORWARD button to select a higher digit or the REWIND button

to select a lower digit until you have reached the right digit. Each time you

press one of these buttons, the machine says which digit you have just

selected.

3. Press the CODE button to set the digit you have selected as the first digit of

your personal security code. Now the machine will say the second digit of the

security code to which it is set.

4. Press the FAST FORWARD button to select a higher digit or the REWIND button

to select a lower digit. Each time you press one of these buttons, the machine

says which digit you have just selected.

5. Press the CODE button to set the digit you have selected as the second digit

of your personal security code. Now the machine will say the third digit of the

security code to which it is set.

6. Press the FAST FORWARD button to select a higher digit or the REWIND button

to select a lower digit. Each time you press one of these buttons, the machine

says which digit you have just selected.

7. Press the CODE button to set the digit you have selected as the third digit of

your personal security code. The machine will repeat the security code you

have just set.

8. If during code setting no button is pressed for one minute, the machine will

automatically leave the setting mode and return to the previous mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom deskmaster 125 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info