Bedienungsanleitung Topcom nelson (Seite 19 von 31) (Deutsch, Englisch, Holländisch, Französisch)

299689

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Nelson

Wall Mounting

The NELSON can be used as a table model or can be wall mounted. Use screws to

fix the base set to the wall. Fix the screws one above the other with an interme-

diate distance of 9,8 cm into the wall. Place the openings in the underside of the

base unit over the screws and slide it down.

In order to be able to hang the handset in

the baseset (in case of wall mounting), turn

the hook downwards. Now you can hang

the handset on the hook of the baseset.

Electrical Connection

Connect the small plug to the baseset (3) and plug the adapter in a 220 V wall

outlet.

Telephone Network Connection

Plug one end of the telephone line cord into the appropriate jack in the back of

the telephone (4) and the other end of the telephone line cord into the house tele-

phone jack or in a telephone exchange.

Attaching the Belt Clip

The belt clip is quickly and easy to attach: slide down the clip on the handset.

Insert the belt clip in the guide slots and slide it up.

Battery Charging

Before you can make a telephone call, the battery of the handset needs to be

charged. Full battery charging takes about 15 hours. Place the handset in the con-

nected baseset for charging. The red battery indicator ( 8 ) lights up. After 15

hours the battery is completely charged and the phone is fully operational.

Note:

• Faulty batteries are small chemical waste and should be treated as such, never

throw them away with the rest of the household waste.

• Remove the battery from the handset when you leave for a long time and you

isolate the power supply.

• When you have not charged the battery in the handset for a long time, charge

the battery at least over night before use.

Tone and Pulse Dialling

If your telephone company offers a Touch Tone dialling system, set the Tone/

Pulse selector switch (5) on the baseset in Tone position. If your telephone com-

pany offers the older mechanic dialling system, set the selector switch in Pulse

position.

If you are unsure which system you are connected to, set the selector switch in

the Tone position. Lift the handset. When you hear a dial tone, dial a telephone

number. If the connection is not made, move the selector switch to the Pulse

position and try again.

Baseset Ringer Volume

Set the ringer switch of the baseset (6) in HI or LO position. If you do not want to

be disturbed by the telephone ringing, set the ringer switch in the OFF position.

Handset ON/OFF

Make sure the unit is switched ON. At the bottom of the handset (between the

battery charger contacts), there is a switch (21) to turn the handset ON (I) and OFF

(O). Use a pointed object (biro, etc.) to adjust the switch if necessary.

Delayed Ringing

When the handset is not in its base, the handset will start ringing with a delay

because first the radio contact between base and handset must be established.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom nelson Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info