Bedienungsanleitung Topcom Protalker PT-1116 - RC 6421 (Seite 4 von 47) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

483960

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Protalker 1116

6 Using a PMR 446 Mhz radio

To communicate between PMR devices they need to be set all on the same frequency +

sub-channel code and within receiving range (up to max. 10 km in ideal conditions).

Since the PT-1116 operates on licence free 446 MHz fre

quencies, all other licence free 446 MHz

PMR radio's will operate on the same radio frequencies. Therefore, privacy is not guaranteed.

Anybody with a PMR set to your radio frequency can overhear the conversation.

If you want to communicate (transmitting a voice sign

al) you need to press the PTT-button .

Once this button pressed, the device will go into transmit mode and you can speak into the

microphone. All other PMR devices in range , on the

same channel and in standby mode (not

transmitting) will hear your message. You need to wait until the other party stops transmitting

before you can reply to the message. To reply, just press the PTT-button and speak into the

microphone..

If 2 or more users press the PTT- button at the same time the receiver will

receive only the stongest signal and the other signal(s) will be supressed.

Therefore you should only transmit a signal (press PTT- button) when the

channel is free.

The range of radio waves is strongly affected by obstacles such as

buildings, concrete/metal structures, the unevenness of the landscape,

woodland, plants, humidity … This implies that the range between two or

more PMR's may in some extreme cases be restricted to a maximum of a few

tens of meters. You will soon notice that PMR works best when there is a

minimum of obstacles between users.

7 Included in the package

• 1 x Protalker PT-1116

• 1 x Beltclip

• 1 x Desktop Charger

• 1 x Power adapter

• 1 x Li-ion battery

• 1 x ECO User guide

8 Getting started

8.1 Installing the battery pack



Align the battery pack with the back of the PMR body. Press

the battery pack and PMR body firmly together until the

release latch locks up the battery.

8.2 Removing the battery pack



While pressing the release latch, pull the battery pack away

from the PMR body

8.3 Installing the belt clip



Remove the screw on the back of the radio, put the clip

button on, and fix it with the screw.

Match the grooves of the belt cli

p with the button, push the

belt clip downwards until it is locked.

8.4 Removing the belt clip



Push the spring of the belt clip supporter downwards and

push the belt clip puwards to remove it from the radio.

8.5 Installing the hand strap



Slide the small loop of the hand strap through the strap hole

on the upper rear of the PMR body.

Pull the entire hand strap through the small loop to secure

the hand strap in place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Protalker PT-1116 - RC 6421 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info