Bedienungsanleitung Topcom Twintalker 5400 - RC 6403 (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

483956

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

Twintalker 5400

12.7.1 Changing sub-channels

12.8 Making a call

12.9 Monitor

You can use the monitor function to check for weaker signals in the current channel.

• Press the MON - key to start monitoring.

• If you hold this key for more than 3 seconds, the radio will go into continuous monitoring mode.

• Press the key again to disable the monitor function.

12.10 Channel Scan

Channel scan performs a search for active signals in an endless loop from channel 1 to 8.

Once an active channel is found, the scanning will stop so you can listen to the conversation.

If there is no more activity on the found channel, the scanning will resume after two seconds.

If you press the PTT- key on the found channel, the scan function will end and the radio will remain on this channel.

12.11 VOX

When the optional headset (without PTT-key) is connected, the voice activated transmission function (VOX) can be used.

This way, the user does not need to press the PTT button to start transmitting. The Twintalker 5400 will start transmitting when you

start talking into the microphone of the headset.

12.12 Roger Beep On/Off

After the PTT - key is released, the unit will send out a roger beep to confirm that you have stopped talking.

12.13 Key Beep On/Off

When a key is pressed, a tone can be heard.

12.14 Key lock

13 Warranty

13.1 Warranty period

The devices have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. There is no warranty

on standard or rechargeable batteries.

Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be

proven by presentation of the original or copy of the purchase receipt, on which the date of purchase and the unit-model are indicated.

13.2 Warranty exclusions

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories are

not covered by the warranty.

The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during

transportation. No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible. Any

warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer

• Press the - key : The current selected sub-channel (or “oF” in case of

no sub-channel) will blink.

• Use the - key or the - key to select the desired sub-

channel:

1..38: CTCSS code (1...38)

39..121: DCS code (1...83)

• Press the PTT - key to confirm

When you press the - key you will transmit a call tone to the other users on the same

channel/sub-channel.

This will indicate that you want to start a conversation.

• Press the - key

There are 5 different call tones. You can select a call tone in the menu:

• Press the - key four times

• Use the - key or the - key to select the call tone

• Press the PTT - key to confirm.

• Press the - key two times

• Use the - key or the - key to select Y for scanning

• Press the - key to confirm : Scanning will begin

• The scanning will stop once the PTT - key is pressed.

• Press the - key three times

• Use the - key or the - key to select the VOX level or oF to

disable VOX. (there are 5 VOX levels)

– Level 1 : Highest sensitive for quite environments

– ...

– Level 5 : Lowest sensitivity for noisy environments

• Press the PTT - key to confirm

Annex B will show all detailed information about the CTCSS and DCS sub-channel codes.

The Roger Beep can be switched On or Off:

• Press the the - key five times

• Use the - key or the - key to enable (Y) or disable (n) the

Roger Beep

• Press the PTT - key to confirm

The key beep can be switched On or Off:

• Press the - key six times

• Use the - key for the - key to enable (Y) or disable (n) the

key tone

• Press the PTT - key to confirm

• Press and hold the -key for three seconds to activate/deactivate the key

lock function.

When key lock is enabled, the PTT- key , the volume control-keys, the monitor-key (MON) and the call-

key the will still be operational. All other keys are locked.

This product is in compliance with the essential requirements and other relevant provisions of the R & TTE directive

1999/5/EC.

The Declaration of conformity can be found on :

http://www.topcom.net/support/cedeclarations.php

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Twintalker 5400 - RC 6403 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info