Bedienungsanleitung Topcom Twintalker 9500 (Seite 7 von 123) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

483952

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

ENGLISH

Twintalker 9500

13.7.1 CTCSS

13.7.2 DCS

13.8 Monitor

You can use the monitor feature to check for weaker signals in the current channel.

• Press the -button and -button simultaneously to activate channel

monitoring.

• Press the -button to stop channel monitoring.

13.9 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit

a signal when it is activated by your voice or other sound around you. VOX operation is not

recommended if you plan to use your radio in a noisy or windy environment.

13.10 Channel Scan

Channel scan performs searches for active signals in an endless loop from channel 1 to 8.

Once an active channel is found you have the option to search for the CTCSS code or the DCS

code that is set by the user who is broadcasting on the channel.

13.10.1 Scanning for an active radio channel

Once an active channel is found, the scanning will stop and you can listen to the transmission.

When the transmission on the found channel stops, the scanning will resume automatically.

13.10.2 Scanning for a CTCSS code

When an active channel is found press the button to select the found active channel.

Now you have to option to search for the CTCSS/DCS code that is used by the found user.

Once there is a transmission on the channel, the CTCSS code (if used) will be detected and

displayed.

• Press the -button twice : "CTCSS" and the current

CTCSS code flashes on the display.

• Press the -button or the -button to change to

another code.

• Press the -button to confirm and return to stand-by

mode.

• Press the -button three times : "DCS" and the

current DCS code flashes on the display.

• Press the -button or the -button to change to

another code.

• Press the -button to confirm and return to stand-by

mode.

PTT

To disable CTCSS or DCS, select code "00" for CTCSS or for DCS in the

menu. When the entry is confirmed, "OF" will be displayed.

During channel monitoring the receiver circuit in the PMR will not listen to

CTCSS or DCS codes.

VOX mode will be overrided when you press the - button .

PTT

• Press the - button four times, the current VOX

setting flashes on the display and the VOX icon is

displayed.

• Press the -button to set the VOX sensitivity level

between 1 and 3 (level 3 is the most sensitive level).

• Press the button until ‘OFF’ appears on the display,

to turn VOX OFF.

• Press the - button to confirm and return to stand-by

mode.

• Press the -button five times : "SCAN" and the

current channel flashes on the display.

• Press the -button or the -button to start the

channel scan.

• Press the -button six times : "SCAN" and "CTCSS

00" flashes on the display for the selected radio channel.

• Press the -button or the -button to start the

CTCSS scan.

PTT

If you press the button while listening to a found channel, the

PMR will go back in stand-by mode on the found channel.

PTT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Twintalker 9500 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info