Bedienungsanleitung Topcom Twintalker 9500 (Seite 8 von 123) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

483952

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

Twintalker 9500

13.10.3 Scanning for a DCS code

Once there is a transmission on the channel, the DCS code (if used) will be detected and

displayed.

13.11 Call Tones

A call tone alerts others that you want to start talking.

13.11.1 Setting the Call Tone

The Twintalker 9500 has 15 call tones.

13.11.2 Sending a call Tone

Press the button briefly. The call tone will be transmitted on the set channel.

13.11.3 Call tone reception type

• Press the -button nine times.

• Press the -button or -button to select the call tone reception type.

1. Tone only

2. Tone + vibration

3. Vibration only

Press the -button to confirm and return to stand-by mode.

13.12 Roger Beep On/Off

After the -button is released, the unit will send out a roger beep to confirm that you have

stopped talking.

To set the Roger Beep.

• Press the - button ten times. ‘rO’ will be displayed.

• Press button to enable (ON) or button to disable the Roger-

Beep (OFF).

• Press the - button to confirm your selection and return to the

standby mode.

13.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.

To set the key-tone.

• Press button eleven times. ‘tO’ will be displayed.

• Press button to enable (ON) or button to disable the Key

Tones (OFF).

• Press the - button to confirm your selection and return to the.

standby mode.

13.14 Dual Channel Monitor function

In stand-by, the PMR is set on one channel with CTCSS/DCS code. The PMR will only receive

signals transmitted on that channel with the CTCSS/DCS code.

Dual Channel Monitor (DCM) allows you to monitor a second channel with CTCSS/DCS code.

When the Dual Channel Monitor function is activated, the PMR will switch sequentially between

the standby channel + CTCSS/DCS code and the Dual Channel + CTCSS/DCS code.

• Press the -button seven times : "SCAN" and "DCS

00" flashes on the display for the selected radio channel.

• Press the -button or the -button to start the

DCS scan.

• Press the - button eight times, “C” is displayed and

the current call tone is flashing.

• Press the - button

or the - button to change to

another Call Tone.

• Press the - button to confirm and return to stand-by

mode.

• If you press the button while listening to a found CTCSS

code, the PMR will go back in stand-by mode on the channel with

the CTCSS code.

• If no CTCSS code is detected there is a chance that DCS is

selected by the user. In this case you can scan for the DCS code.

(section 13.10.3)

PTT

If you press the button while listening to a found DCS code, the

PMR will go back in stand-by mode on the channel with the DCS code.

PTT

• Press the -button twelve times,” DCM OFF" will

flash on the display.

• Press the -button or the -button to change the

channel.

• Press the -button to confirm the channel selection

and go to CTCSS selection. (Press the -button

again to go to DCS selection)

• Press the -button or the -button to change

the CTCSS code or DCS code.

• Press the -button to confirm and return to stand-by

mode.

• To disable the function select "OFF" when selecting the

DCM channel.

PTT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Twintalker 9500 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info