Bedienungsanleitung Topcom ULTRA SR1250 ECO (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

462234

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Phone book Ultra SR1250

• The telephone number is automatically dialled.

4. To end the call, press or (if auto hang-up is set on) replace

the handset on the base station.

4.5 Answering a call

The handset starts to ring during an incoming external or internal call.

• All registered handsets ring when there is an incoming call.

• The call symbol

flashes in the display.

• The caller's number appears in the display if you have caller ID

(CLIP). Contact your telephone line provider for more information. The

caller's name is also shown in the display if:

– the number is stored with the name in the phone book;

– the network transmits the name along with the phone number.

1. You have the following options for answering a call:

– Press to answer the call.

– Pick up the handset from the base station (function only

possible if auto talk has been activated).

• During the call, the symbol , the transmitted caller number and

name are shown for 10 seconds, then the call duration is shown in the

display.

2. To end the call, press or (if auto hang-up is set on) replace

the handset on the base station.

4.6 Setting the loudspeaker volume

Press or during the call to adjust the loudspeaker volume.

You can choose between 5 different settings. The default setting is

level “3”:

4.7 Setting the ringer volume on the handset

1. Press .

2. Press or repeatedly, select ‘HS SETTINGS’.

3. Press to confirm.

4. Press or repeatedly, select ‘HANDSET TONES’.

5. Press to confirm.

6. Press or repeatedly, select ‘RING VOLUME’.

7. Press to confirm.

• The current volume is displayed and can be heard.

8. Press or

repeatedly to select the ringer volume you

want.

9. Press to confirm your selection or press ESC to exit

the menu without saving..

5 Phone book

You can store 200 numbers (up to 24 digits long) with an associated name

(up to 12 characters long) in the phone book.

5.1 Save a new entry in the phone book by the phonebook

1. Press .

2. To add a new entry, press the menu key and select ‘NEW

ENTRY’ with .

•‘ENTER NAME’ appears in the display. Enter the name using the

alphanumeric keys.

3. Press and enter the telephone number.

4. Press to store the entry in the phonebook or press

ESC

to cancel without saving the entry.

5.2 Save a new entry in the phone book by on-hook dial

mode

When you enter a telephone number is standby, and you press afterwards

the menu key you can store the number direct into the

phonebook:

1. In standby enter the telephone number you want to store.

2. Press .

The volume is adjusted in the same way in hands free mode.

To turn off the handset ringer permanently, press and hold

for approx. 3 seconds. The symbol appear in the

display. To reactivate the ringer, press and hold again for

3 seconds.

4 15

HL_Ultra SR1250 eco D73.book Page 6 Wednesday, July 28, 2010 12:39 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom ULTRA SR1250 ECO Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info