Bedienungsanleitung Topcom ULTRA SR1250 ECO (Seite 7 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

462234

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Ultra SR1250 Line settings

ENGLISH

•‘ENTER NAME’ appears in the display. Enter the name using the

alphanumeric keys.

3. Press and edit if necessary the telephone number.

4. Press to store the entry in the phonebook or press

ESC

to cancel without saving the entry.

5.3 Finding and calling a number in the phone book

1. Press .

2. Enter the initial letters of the name using the alphanumeric keys.

• The first name in the list with these letters appears in the display.

3. Press or repeatedly

to scroll through the other numbers

in the phone book.

4. Call the subscriber found: the desired number is highlighted. Press

6 Line settings

6.1 Set country

There are various country depending settings and by setting the country

these parameters are set correspondingly. Each parameter can be set

separately also.

1. Press .

2. Press or repeatedly, select ‘LINE SETTINGS’.

3. Press to confirm.

4. Press or repeatedly, select ‘COUNTRY’

5. Press to confirm.

6. Press or repeatedly to select the country and press

to confirm.

7. Press again to confirm.

7 Additional handsets and base stations

Up to 5 handsets can be registered to one base station. Additional handset

must be registered to the base unit before use. Handsets of a bundled

model are already registered to the base.

7.1 Registering an additional handset

Hold down the paging key on the base station for more than 5

seconds until the message counter display on the base station begins

to flash with ‘ ’-‘ ’.

Registration mode on the base station is now activated for approx. 3

minutes. You must perform the following steps to register a handset:

1. Press .

2. Press or repeatedly, select ‘REGISTRATION’.

3. Press to confirm.

4. Press or repeatedly, select ‘REGISTER’.

5. Press to confirm.

6. Enter the base station PIN code (system PIN, default 0000) and press

• The handset will now search for the base station and register when it

has found it. Following successful registration, the display shows

standby mode and the handset name and number.

8 Answering machine

8.1 LED display

The LED display on the base indicates how many messages you have

received. When there are new messages, the LED display on the base will

blink and only indicate the amount of new messages. After you have

listened to the new messages, the total number of stored messages will be

displayed. If the answering machine is switched off, the LED display

does not light up.

If the answering mode is set to answering only, ‘[A]’ will be shown on the

display. When the answering machine answers a call or when it’s

controlled by the handset ‘[--]’ will blink on the display.

4 15

You can only register handsets of the Ultra range (like the Ultra

S1200C)!

This is only necessary if you have de-registered a handset or

bought a new separate handset. You don’t have to register

handsets of a bundle!

4 15

HL_Ultra SR1250 eco D73.book Page 7 Wednesday, July 28, 2010 12:39 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom ULTRA SR1250 ECO Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info