Bedienungsanleitung Toshiba 26DL933G (Seite 15 von 55) (Englisch)

525838

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

English - 14 -

English

Controlling the TV

A wide variety of external equipment can be connected via the sockets located on the side and back of the

TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the

button on the left side of the TV may be used for some functions.

Switching on

If the standby LED is unlit, check that the mains plug is con-

nected to the power and press the middle of the

button

on the left side of the TV to switch the television on. Then the

LED lights up in green. If the picture does not appear, press

button on the remote control; it may take a few moments.

To put the television into Standby, press

button on the

remote control. To view the television, press

button again.

The picture may take a few seconds to appear.

Note: The active Standby LED may appear for a few moments

when the TV is switched off.

For energy saving:

Turning the TV off at its mains supply, or un-plugging it, will

cut energy use to nearly zero for all TV’s. This is recom-

mended when the TV is not being used for a long time, e.g.

when on holiday.

Reducing the brightness of the screen will reduce energy use.

Energy efﬁ ciency cuts energy consumption and thus saves

money by reducing electricity bills.

NOTE: Putting the TV into standby mode, will reduce energy

consumption, but will still draw some power.

Using the Remote Control

Press the MENU button on the remote control to see the

menus.

The main menu appears as a group of icons each for a menu

option. Press the Left or Right button to select a topic.

In sub menu screen mode the menu appears as a list. Press

the Up or Down button to select a topic.

To use the options press the Up and Down buttons on the

remote control to move up and down through them and OK

button, Left or Right buttons to select the required choice.

Follow the on screen instructions. The functions of each menu

are described in detail throughout the manual.

Using the Controls and Connections on the TV

Using the menu wheel on the side of the TV:

To change volume: Press the middle button until the

volume level OSD appears. Increase the volume by

pushing the button up. Decrease the volume by pushing

the button down.

To change channel: Press the middle button until the

channel information banner appears. Scroll through the

stored channels by pushing the button up or down

To change source: Press the middle button until the

source list appears. Scroll through the available sources

by pushing the button up or down.

To turn the TV off: Press the middle of the button down

and hold it down for a few seconds, the TV will turn into

standby mode.

Please always refer to the owner’s manual of the equipment

to be connected for full details.

SIDE AV

YPbPr

MODE

5Vdc

Max:500mA

Standby LED

Up Direction

Programme / Volume /

IR receiver

Down Direction

AV / Standby On

selection switch

01_MB62_[GB]_(01-TV)_DVB_TC_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077727_10077398.indd 1401_MB62_[GB]_(01-TV)_DVB_TC_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077727_10077398.indd 14 08.05.2012 14:55:5108.05.2012 14:55:51

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 26DL933G Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 26DL933G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info