Bedienungsanleitung Toshiba 26DL933G (Seite 16 von 55) (Englisch)

525838

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

English - 15 -

English

Initial Installation

Before switching on the TV, put your decoder and media recorder to Standby if they are connected and

ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as

detailed on page 8.

IMPORTANT: Ensure that the aerial is connected and

a Common Interface module is not inserted before

switching on the TV for the ﬁ rst time installation.

Connect the mains plug and switch the TV to on 1.

using the side control switch. If the TV does not

switch on, press any numbered or

button on

the remote control, then the language selection

menu will be displayed. This screen will appear

the ﬁ rst time that the TV is switched on and each

time the TV is reset.

By pressing 2. Up or Down button, highlight the

language you want to set and press OK button.

The following message will be displayed next:

By pressing 3. Left or Right button, select the

country you want to set and press Down button

to highlight the Search Type option. Use Left or

Right to set the desired search type. Available

search types are digital only, analog TV only

and full.

When set, 4. Down buton to select Teletext

Language. Use Left or Right button to select

desired Teletext Language.

Press 5. OK button on the remote control to continue

and the following message will be displayed on

the screen:

Select 6. Yes button by using Left or Right button

and press OK button to continue. Afterwards, the

following OSD will be displayed on the screen:

If you select 7. Cable option, the following screen

will be displayed:

You can select frequency ranges from this 8.

screen. For highlighting lines you see, use Up or

Down button. You can enter the frequency range

manually by using the numeric buttons on the

remote control. Set Start and Stop Frequency as

desired by using numeric buttons on the remote

control. After this operation, you can set Search

Step as 8000 kHz or 1000 kHz. If you select

1000 kHz, the TV will perform search process

in a detailed way. Searching duration will thus

increase accordingly. When ﬁ nished, press OK

button to start automatic search.

If you select 9. Aerial option from the Search Type

screen, the television will search for broadcasts.

The Auto tuning screen will appear and the 10.

television will start to search for available stations.

The progress bar will move along the line. You

must allow the television to complete the search.

The following OSD will be displayed on the screen

and the television will search for the selected

broadcasts:

01_MB62_[GB]_(01-TV)_DVB_TC_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077727_10077398.indd 1501_MB62_[GB]_(01-TV)_DVB_TC_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077727_10077398.indd 15 08.05.2012 14:55:5208.05.2012 14:55:52

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 26DL933G Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 26DL933G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info