Bedienungsanleitung Toshiba 48L1863 (Seite 16 von 31) (Englisch)

681971

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English - 15 -

Note: Default PIN could have been set to 0000 or 1234. If you

have dened the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have dened.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s le system will be converted

to FAT32. In most cases operation errors will be xed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser

You can play back music and movie les and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OK. Then select the le of your choice and press OK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button

while playing back a video le or displaying a picture

le. Press the Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change

according to the type of the currently open media le.

Only Sound Settings menu will be available while

playing back audio les.

Loop/Shufe Mode Operation

Start playback and activate

All les in the list will be

continuously played in

original order

Start playback and activate

The same le will be

played continuously

(repeat)

Start playback and activate

All les in the list will be

played once in random

order

Start playback and activate

All les in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>System>More menu

should be set as Enabled at rst. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>More

menu accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV does not mute its other

audio outputs automatically. You will need to decrease

TV volume to zero manually if you wish to hear the

ARC audio only (same as optical or co-axial digital

audio outputs). If you want to change connected

device’s volume level, you should select that device

from the source list. In that case volume control keys

are directed to connected audio device.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the Settings>System>More

menu as Amplier. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 48L1863 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 48L1863

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info