Bedienungsanleitung Toshiba D1 (Seite 15 von 20) (Englisch)

485539

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

28 29

Operations

■ The image adjustment menu

Use this menu to adjust image-related items.

Items Items that can be adjusted are marked with “Ye s”, and those that cannot are marked

with “No”.

Item Description

Computer

Y/PB/PR Video S-video

Contrast Lower Higher Yes Yes Yes Yes

Brightness Darker Brighter Yes Yes Yes Yes

Color Lighter Deeper No Yes Yes Yes

Tint

[Note 1]

Reddish Greenish No No Yes Yes

Sharpness Softer Sharper No Yes Yes Yes

R-level Less red More red Yes Yes Yes Yes

G-level

Less green More green

Ye s Ye s Ye s Ye s

B-level Less blue

More blue

Ye s Ye s Ye s Ye s

Up/down shift

[Note 2]

Shift down

Shift up No Yes Yes Yes

Notes

1: Tint can only be adjusted when Video mode

p.23

is NTSC or NTSC4.43.

2: Up/down shift can only be adjusted when Screen size

p.29

is Wide. During the adjustment, the

picture may be instability.

■ The default setting menu

This menu shows placement status and other settings.

Set projection mode in accordance with Placement Style

Set the time to wait after signal input stops until turning off the power:

Off (not turned off) 1 min 2 min ... 60 min

Set whether to turn on the power when the ON/STANDBY button is pressed

(Manual), or the main power switch is used (Auto). Manual Auto

Set the lamp power Standard Low

Set standby mode according to functions used Standard Economy

Description

Item

Projection

mode

No signal

power off

Power on

Lamp power

[Note 1]

Standby mode

[Note 2]

(Back hung

from ceiling)

(Placed

on floor)

(Rear)

(Hung from

ceiling)

p.21

Note

1: When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets

quieter. This setting will be cleared when you turn the power off.

Notes

• Note that if Power on is set to Auto, then if the main power switch is turned on when

power is restored after a power outage, the projector power will come on.

• Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power.

Turning off the main power switch to cut off the power will shorten the life of the lamp.

■ The display setting menu

Use this menu to set screen display-related items.

(Full): Display with native resolution (1,024 x 768 pixels)

(Thru): Display with sampling resolution (for computer input)

(Wide): Wide-screen display (for Video, S-video, and Y/P

)

Select one of the languages below to use for displaying menus and messages

[ : Enter setting mode] [ :Selection] [Apply: ]

English/Français/Deutsch/Italiano/Español/

Português/ / / /

Screen to display when there is no input signal

(Logo) (Blue) (None)

Display icons as function guides On Off

Display start-up screen when power turned on On Off

Description

Item

Screen size

Language

Background

Icon

Start-up screen

Note

• If “Thru” is selected for screen size, portions exceeding the native resolution will not

appear on the screen. Note that for RGB signals with clock frequency 140MHz or lower,

all input pixel signals are sampled. (This effect is noticeable when the screen is enlarged

using the Resize function

p.36

). However, if the clock speed is higher than this, the

RGB pixel signal is thinned before sampling.

■ Reset menu (Special menu)

This menu is displayed when other menus are not displayed, and the button is held

down until the menu appears.

• When the screen is placed vertically, and Auto keystone correction is executed, but

the keystone correction is not successful, stow the foot adjuster in its original position,

place the projector on a flat surface, select Horizontal reference value reset, and press

the

button.

• Select Reset All and press the

button to return all menu items to the factory settings.

Reset the horizontal reference value for Auto keystone correction

[ : Enter execution mode] [Yes No] [Apply: ]

Reset all menu items to their factory settings

[ : Enter execution mode] [Yes No] [Apply: ]

DescriptionItem

Horizontal reference

value reset

Reset all

Using the menu (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba D1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info