Bedienungsanleitung Toshiba D1 (Seite 17 von 20) (Englisch)

485539

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Others

The indicator lights inform you of internal abnormalities.

No power

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

p.32

Lamp went out during use, or won’t come on

⇒ The abnormal indication of the LED continues for about 1 minute

then the projector returns to standby mode after cooling for a

while. If the projector fails to operate normally after turning the

power back on, either the lamp needs replacing, or there is a

problem with the projector.

• If a lamp burns out, replace it with a new one.

• Unplug the power cord, and contact your dealer.

Power went out during use, or power won’t come on

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not

blocked.

• Unplug the power cord and wait for a short while, then turn the

power back on.

• Clean the air filter.

p.30

❈ The icon will appear before the power goes out.

❈ The abnormal indication of the LED continues for about 1

minute then the projector returns to standby mode after cooling

for a while.

Power went out during use, or power won’t come on

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ The abnormal indication of the LED continues for about 1

minute then the projector returns to standby mode after cooling

for a while.

PRECAUTIONS

• Make sure to unplug the power cord if something goes wrong.

• If the power cord is unplugged before cooling is complete, give the lamp time (about 10

minutes) to cool before plugging it back in. If the lamp overheats it may fail to light.

Unplugging the power cord repeatedly when the temperature is high will shorten the life

of the lamp. (Even if you are not concerned about lamp lifetime, the light may not come

on if you do not wait at least 3 minutes.)

Trouble indications

FANTEMPLAMP

(Red lit) (Red lit)

(Red lit) (Red lit) (Green lit)

(Orange lit)

(Red lit

or flashing)

(Red lit)

Remove the lamp cover.

Loosen the screws and remove the lamp cover.

Pull out the lamp.

Loosen the three screws holding the lamp in place,

and pull on the handle to remove the lamp.

Mount the new lamp.

Align the orientation, press down until the bottom is

reached, and lock in place using the three lamp

locking screws.

Replace the lamp cover.

Align the cover, and press it in, then screw in the

screw loosened in step

until the lamp cover is

no longer loose.

Reset the lamp timer.

See the lamp’s manual for instructions on resetting

the lamp timer.

Notes and Precautions

• Press the button twice to display (a rough guide) of the time of use from the Lamp

time item on the Status display menu.

p.26

• As a rule of thumb, it is recommended that the lamp should be replaced after 1,500

hours of use. When Lamp time reaches 1,500 hours, the

icon and a message will

appear. When pressing the

button, the message disappears.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

lamp may fail to come on

p.33

, and the lamp’s lifetime may be shortened.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic

mercury. Be careful not to break used lamps, and dispose it in accordance with local

regulations.

Lamp replacement (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba D1 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info