Bedienungsanleitung Toshiba DR1SU (Seite 27 von 144) (Englisch)

31135

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Playback

Recording

Editing

Function setup

Others

Introduction

Library

Note on recording on a DVD-R disc

Confirm disc compatibility and prepare an available

DVD-R disc to record on (

page 6, 9).

To play a DVD-R disc recorded on this recorder on

other devices, finalize the DVD-R disc on this

recorder. (

page 106)

The finalization permanently disables the disc’s

rewritability. (Canceling the finalization is not possible.)

• DVD-Video finalize process cannot be canceled if

once executed on a DVD-R disc.

• On DVD-R discs recorded on other devices, you

cannot execute DVD-Video finalize process or add

recordings on this recorder.

To check space remaining on a disc

1) Press the REMAIN button.

The current capacity is displayed at the bottom of

the screen and on the front panel display.

2) After checking the capacity, press the button

again to turn off the display.

Note

• You can also check the capacity of the disc by selecting

“Disc Budget Calculation” from the Quick Menu on the

REC MENU ( page 45).

Programmed recording and operational status

The recorder gives priority to programmed recordings

in every operating mode. Even if the recorder is

playing, recording or editing, or even in standby mode,

at a starting time of a programmed recording the

recorder will make itself ready or stop those

operations and start the recording.

Notes

• The “Loading” icon appears in the top right of the screen after recording. This indicates that the unit is executing

the final recording process (writing managing information). Operations other than changing channels cannot be

done until this icon disappears. The time for executing this process differs depending on the recording time or

capacity of the disc.

• Note that all recording content may be deleted if the unit is disconnected from a wall outlet, or a power failure

occurs, during recording.

• If a power failure occurs within five minutes prior to the programed recording start time, the programmed recording

may not be executed.

• A programmed recording may not be executed correctly if scheduled when Daylight-Saving time starts or ends.

When the programmed settings overlap

Before the first recording is completed, the second

program is scheduled to begin recording. When using

a DVD-RAM disc, the recording of the previous

program stops 15 seconds before the next program

starts.

When using a DVD-R or DVD-RW disc, the recording

of the previous program stops about 2 minutes before

the next program starts, to complete data process. In

this 2 minutes, you cannot operate the loaded DVD-R

or DVD-RW disc.

On a programmed recording across the change-

over of Daylight-saving time

• When the clock gains across Daylight-saving time

during a programmed recording, it means that the

recording completion time is consequently set one-

hour earlier. In this case, set the programmed

recording one-hour longer in advance. If not set

accordingly, the programmed recording stops one-

hour shorter.

• When the clock loses across Daylight-saving time

during a programmed recording, it means that the

recording completion time is consequently set one-

hour later. In this case, as the programmed

recording continues one-hour longer, delete

unnecessary chapters by chapter dividing after the

completion of recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba DR1SU Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info