Bedienungsanleitung Toshiba DR1SU (Seite 29 von 144) (Englisch)

31135

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Playback

Recording

Editing

Function setup

Others

Introduction

Library

DVD-RAM Physical Format

Physical formatting is a simple execution for a disc which

cannot be used or read (or which is becoming hard to

read). It may refresh such a disc for recording and

playback. (There is no guarantee that all such discs will

be recovered.)

“DVD-RAM logical format” process only rewrites certain

data on file system and management information,

however, “DVD-RAM physical format” rewrites all data on

a disc, therefore it takes a much longer time to complete.

For a 4.7GB single sided DVD-RAM, about 70 minutes

will be necessary. While processing, all recorder

operations and functions including program recording will

not work until the process is finished. Also this process

erases all data stored on the DVD-RAM disc.

Notes

• The physical format process may fail if executed to a dirty

DVD-RAM disc. Also, the disc may be difficult to record,

even if it finished. Before executing DVD-RAM physical

format process, be sure to confirm the disc is not dirty.

Clean it if necessary. If the disc has scratches or dust

beyond cleaner’s efficacy, do not execute DVD-RAM

physical format process on the disc.

• The following DVD-RAM discs require physical formatting:

– A disc which is not formatted correctly.

– The disc which has errors during writing because of dirt

on the disc, and cannot be further recorded, or cannot

initialize normally.

• You need to start physical formatting from the first step

again when you use a failed disc.

• Physical formatting does not work if the disc contains a lot

of void beyond limitation of this recorder.

• If an error occurs in physical formatting, “ERR-01” appears

in the front panel display. To turn off the message, press

the DISPLAY button.

4) Press the / buttons to select “Start,” then

press the ENTER button.

5) Press the

/ buttons to select “Start,” then

press the ENTER button.

Initialization starts.

When initialization is completed, the setup window

disappears.

Disc format

DV D Format

Start

Entire disc contents excluding

library data will be erased if

disc is formatted. Proceed?

Cancel

DV D Format

Start

Cancel

Disc format

DVD

Formatting

1) During stop, press the SETUP button.

2) Press the

/ buttons to select “Management

Settings” then press the ENTER button.

3) Press the

/ buttons to select “DVD-RAM

Physical Format,” then press the ENTER

button.

4) Press the

/ buttons to select “Yes,” then

press the ENTER button to execute.

To cancel, select “No”, then press the ENTER

button.

5) Read the message, and press the

/ buttons

to select “Yes” or “No”, then press the ENTER

button.

Yes

Warning: It will take approximetely

70 minutes to format a 4.7GB

DVD-RAM and all data will be erased.

Confirm t

hat timer programing is not

scheduled.

Procceed?

Management Settings

Use

DVD Drive Software

SETUP

Eco. Mode

Software Version

DVD-RAM Physical Format

Genre Setting

Auto

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba DR1SU Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info