Bedienungsanleitung Toshiba e-STUDIO 283 (Seite 271 von 354) (Englisch)

681673

271

Zoom out

Zoom in

Vorherige Seite

1/354

Nächste Seite

269

2C6D NIC system error Turn the power OFF and then back ON. Retry the job in error. If

the error still occurs, contact your service representative.

2C70 SMTP service is not

available

Ask your administrator to enable the SMTP setting.

2C71 SMTP authentication

error

Check if the SMTP authentication method, login name and

password are correct.

If the SSL setting is enabled, check if the setting and the port

number of SSL correspond to those of the server.

2C72 POP Before SMTP

error

Check if the settings of POP Before SMTP and POP3 are cor-

rect.

2C80 Failed to process

received E-mail job

Ask your administrator to confirm whether the Received Internet

Fax Forward is set.

2C81 Failed to process

received Fax job

Ask your administrator to confirm whether the Received Fax

Forward is set.

2CC0 Job cancelled Job was cancelled.

2CC1 Power failure occurred Make sure that the power cable is connected properly and it is

inserted securely. Resend the job.

Save as File

2D10, 2D12,

2D13, 2D20-

2D22

Illegal job status Turn the power OFF and then back ON.

Retry sending. If the error still occurs, contact your service rep-

resentative.

2D11 Not enough memory

for saving the scan job

Wait for a while and retry the job. If the error still occurs, turn the

power OFF and then back ON and retry it.

2D14 An internal error

occurred

Turn the power OFF and then back ON, and retry the job. If the

error still occurs, contact your service representative.

2D15 Exceeding maximum

file capacity

Divide the file into several files, or retry in a single-page format.

2D30 Failed to create direc-

tory

Make sure that the access privilege to the storage directory is

writable and also the disk in the directory has enough space,

and then retry the job. If more than one job is performed simul-

taneously, the error may occur because the disk temporarily

runs out of space. In this case, wait for a while and retry the job.

If the error still occurs, turn the power OFF and then back ON,

and then retry it.

2D31, 2D33 Failed to create file Make sure that the access privilege to the storage directory is

writable and also the disk in the directory has enough space,

and then retry the job. If more than one job is performed simul-

taneously, the error may occur because the disk temporarily

runs out of space. In this case, wait for a while and retry the job.

If the error still occurs, turn the power OFF and then back ON,

and then retry it.

2D32 Failed to delete file Make sure that the access privilege to the storage directory is

writable and then perform it again. If the error still occurs, turn

the power OFF and then back ON, and then carry it out again.

2D40 Failed to convert

image file format

Turn the power OFF and then back ON. Retry the scan. If the

error still occurs, contact your service representative.

Error code Problem What to do

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 283 Seite 271

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 283

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info