Bedienungsanleitung Toshiba mt700 dlp projector 720p (Seite 27 von 36) (Englisch)

215054

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Menus

English

3. Color: Increases or decreases the color intensity of the image. The higher the value, the more

vivid and brighter the color.

4. Tint: Adjusts the color tones of the image. The higher the value, the more greenish the picture

becomes. The lower the value, the more purplish the picture becomes.

5. Filter: Turns the video and data filters on or off. Filters can reduce picture noise to produce a

sharper image. The higher the setting, the less the noise.

6. Sharpness: Adjusts the picture sharpness. The higher the number, the sharper the picture.

7. Extended Picture Setting

Q Color Temp: You can choose a preferred color temperature from among Lamp Native, Warm,

Middle, Cool, User 1, and User 2. Refer to for more information about storing the color

temperature to User 1 and 2.

Q Color Enhancement

Red: Adjusts red hues independently. The higher the setting, the greater the intensity of red

color in the image.

Green: Adjusts green hues independently. The higher the setting, the greater the intensity of

green color in the image.

Blue: Adjusts blue hues independently. The higher the setting, the greater the intensity of blue

color in the image.

Yellow: Adjusts yellow hues independently. The higher the setting, the greater the intensity of

yellow color in the image.

White: Adjusts white peaking.

8. Save Settings: There are three video memories in which users can store settings, including all

of the items in the Picture menu. Each input source can store up to 3 sets of User Memories.

Q To store the settings:

i.) Adjust the items in the Picture menu to your desired values.

ii.) Select Save Settings and then press .

iii.) Select To User’s Memory 1, To User’s Memory 2, or To User’s Memory 3 and press to store

the settings.

iv.) To close the OSD, press MENU.

9. Load Settings: Loads the settings from one of three User Memories or one of four default

settings (Dynamic, Standard, Theater 1, or Theater 2).

Display menu

Use this menu to set the way that the projector displays the picture.

1. Screen Size: Selects the aspect ratio for displaying different video signals.

2. PIP: Selects a second input signal for displaying a second image.

3. POP: Selects a second input signal for displaying a second image.

4. PIP/POP Source Swap: Toggles the active window between the two images. (You can make

adjustments to the active window only.)

5. PC Tuning: The following settings are only available when a PC or RGB signal is selected.

Q Frequency: Adjusts the frequency of the sampling clock that captures the input signal.

Q Phase: Adjusts the phase of the sampling clock.

Q H. Position: Adjusts the horizontal position of the image.

Q V. Position: Adjusts the vertical position of the image.

Q Auto: Adjusts the phase, and frequency automatically.

p.29

p.22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba mt700 dlp projector 720p Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info