Bedienungsanleitung Toshiba SD-260ESE (Seite 25 von 36) (Englisch)

35405

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- 25 -

ENG

Repeating a section between two specific points

(A – B repeat)

Press A-B RPT during playback at the point where repeat

play is to commence (A).

“A TO B SET A” is displayed on screen.

Press A-B RPT again at the point where repeat play is to

be concluded (B).

“A TO B SET B” is displayed and the repeat-play of the

selection between points A and B starts.

To return to normal play:

Press A-B RPT again. “A TO B CANCELLED” is displayed

and the A-B Repeat is disabled.

¥ NOTE:

• If you give up entering the point B after entering point A

simply press RETURN, and the operation is cancelled.

CONVENIENT FUNCTIONS

Displaying the time information

Press TIME during playback.

Each time this button is pressed, a different time information

box is displayed on the screen.

If “SINGLE ELAPSED” is displayed, the VFD display on

the unit shows the elapsed time for the track which is being

played.

If “SINGLE REMAIN” is displayed, the VFD display on the

unit shows the remaining time for the track which is being

played.

Displaying a scene with a larger and closer view

ZOOM function enables you to take a closer look at the

scene you are viewing.

This is especially useful when you are watching a science

fiction or an adventure film.

Press ZOOM during playback.

You can change the zooming ratio by pressing ZOOM

button several times.

¥ NOTE:

• You can move to any area of the enlarged screen by

using the 3/4/6/5 arrow buttons.

To return to normal play:

Press ZOOM several times until “ZOOM OFF” is displayed

on the screen.

AUDIO CD PLAYBACK

Preparations

Turn on your audio system if the player is connected to an

audio system.

Basic Play

1. Press ON/STANDBY button.

2. Press OPEN/CLOSE ( ) to open the disc tray..

3. Place a disc onto the tray

4. Press OPEN/CLOSE ( ) .

Play is commenced.

After operation

When the unit is not in use, remove the disc and press

ON/STANDBY to turn the unit to standby mode.

¥ NOTE:

• If the disc is placed upside down ( and it is a single sided

disc), TV screen will display either “NO DISC” or “DISC

ERROR”.

For your reference:

When

“

appears while a button is being pressed, it

means that the corresponding operation is prohibited by the

player .

Stopping Play

To stop the play permanently, press STOP (<) twice.

When the STOP (<) button is pressed once, a message

“PRESS PLAY TO CONTINUE” will appear on the screen to

remind you if you want to continue the play. To stop the play,

press the STOP (<) button again or you can press PLAY/

PAUSE to continue playback.

Fast Forward / Reverse

Press FWD 8 or REV 7 during playback.

The speed of advance or reverse changes for every

press of the FWD or REV button.

Normal play is resumed when PLAY/PAUSE button is

pressed.

¥ NOTE:

No sound will be heard during rapid advance or rapid

reverse.

Skip Forward / Backward

Press SKIP/STEP: or SKIP 9 during playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba SD-260ESE Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info