Bedienungsanleitung Toshiba SD-260ESE (Seite 26 von 36) (Englisch)

35405

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- 26 -

ENG

A track is skipped forward or backward each time the

button is pressed.

Pause

Press PLAY/PAUSE during playback.

The play freezes.

To return to normal play:

Press PLAY/PAUSE again.

DIRECT SELECTION OF TRACKS

Selecting by Time

You can play the audio CD starting from any time point you

want.

Press SEARCH on the remote control during playback.

The time search box is displayed on the screen as GO TO:

_ _ : _ _ / xx : xx

Enter the time using number buttons.

¥ NOTE:

• Press RETURN to cancel the operation.

• If you wait for ten seconds without pressing any button

for selecting tracks, the operation is cancelled.

Accessing tracks using number buttons

You can play any track you want, just by pressing the

corresponding number button.

For the track numbers which are greater than “9”, use +10

button. Press this button once and then enter the two digit

track number.

If you attempt to enter a number greater than the total

number of tracks on disc,

“

symbol is displayed on

screen.

REPEAT PLAY

Press PLAY MODE during playback.

Each time this button is pressed, a different repeat box is

displayed on the screen.

If “REP-ONE” is displayed, the current track will be played

again.

If “REP-ALL” is displayed, all tracks on disc will be played

again.

If “REPEAT OFF” is displayed, the repeat mode is disabled.

Repeating a section between two specific points

(A – B repeat)

Press A-B RPT during playback at the point where repeat

play is to commence (A).

“A TO B SET A” is displayed.

Press A-B RPT again at the point where repeat play is to

be concluded (B).

“A TO B SET B” is displayed and the repeat play of the

selection between points A and B starts.

To return to normal play:

Press A-B RPT again. “A TO B CANCELLED” is displayed

and the A-B Repeat is disabled.

¥ NOTE:

If you give up entering the point B after entering point A,

simply press RETURN and the operation is cancelled.

CONVENIENT FUNCTIONS

Displaying the time information

Press TIME during playback.

Each time this button is pressed, an information box is

displayed on TV screen to indicate the status of the time

displayed on the VFD display.

If “SINGLE ELAPSED” is displayed, the VFD display on the

unit shows the elapsed time for the track that is being

played.

If “SINGLE REMAIN” is displayed, the VFD display on the

unit shows the remaining time for the track which is being

played.

If “TOTAL ELAPSED” is displayed, the VFD display on the

unit shows the elapsed time for the disc which is being

played.

If “TOTAL REMAIN” is displayed, the VFD display on the

unit shows the remaining time for the disc which is being

played.

Program Function

Press PROGRAM button to select program mode in stop

mode.

Enter track numbers that you want to add to program list.

For the track numbers which are greater than “9”, use +10

button. Each press increases the number by 10.Then type

the second digit of track number.

Press ENTER button to finish the program entry.

Screen is cleared and it will start playing the program list.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba SD-260ESE Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info