Bedienungsanleitung Toshiba TD-Z471 (Seite 11 von 76) (Englisch)

562486

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Introduction

Parts Name and Functions

Buttons, Switch, and Indicator

OFF

Front

Control buttons

Rearedis thgiRedis tfeL

1 Main Power Switch —Switches the main power on/off and is used as the disconnect device.

Within 2 seconds after turning off the power by the POWER button on the wireless remote control or the monitor or by

a communication command, don’t turn off the main power switch, don’t disconnect the power cord, and don’t turn off

the breaker. If the AC power is turned off immediately after the power-off operation, all the OSD settings including the

language selection may be reset to the factory defaults at the next power-on. If the OSD settings are reset to the factory

defaults as described above, reconﬁgure the OSD settings using the following procedure.

• Turn off the power of the monitor using the wireless remote control or otherwise.

• Wait for at least 2 seconds.

• Turn on the power of the monitor using the wireless remote control or otherwise.

• Check and recongure the OSD settings.

2 Remote control sensor and Power indicator—

Remote control sensor: Receives the signal from the wireless remote control.

Power indicator: Indicates the state of the LCD display.

• Steady green: The power is on.

• Steady red: The power is off. Some operations such as power-on are possible.

• Steady green and red: The LCD display is in the sleep mode.

• Off: The main power is off.

• Steady red and blinking green: The LCD display is in the schedule standby mode.

• Blinking red: The LCD display has an error (detected by the self-diagnostic function).

3 POWER button—Switches the power on/off.

This button doesn’t work when the power indicator is off. Turn on the main power. (See page 35.)

4 MUTE button—Switches the audio mute on/off.

5 INPUT button—Displays the OSD menu to switch the video input. You can select [HDMI1], [HDMI2], [DVI-D],

[D-SUB], [OPTION]*, [DISPLAYPORT], [YPbPr], [S-VIDEO], or [VIDEO] using the UP (▲) or DOWN (▼)

button.

OPTION can be used when an expansion module is mounted on the option slot.

6 PLUS (+) button—Acts as (+) button to increase the adjustment in the OSD menu. Increases the audio output level

when the OSD menu is off.

7 MINUS (-) button—Acts as (-) button to decrease the adjustment in the OSD menu. Decreases the audio output level

when the OSD menu is off.

8 UP (▲) button—Acts as (▲)button to move the highlighted area up to select an adjustment item in the OSD menu.

9 DOWN (▼) button—Acts as (▼)button to move the highlighted area down to select an adjustment item in the OSD

menu.

10 EXIT button—Activates the OSD menu when the OSD menu is off. Acts as EXIT button to go back to the previous

OSD menu.

11 Speakers—Audio sound is output from the built-in speakers.

12 Brightness sensor (on the front and rear)—Sensor for the auto brightness function.

(Reference) Control Lock mode

You can lock the operation buttons. See page 64.

For details about the OSD menu operation using the buttons, see “Basic operation of OSD.” (See page 48.)

Parts Name and Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TD-Z471 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info