Bedienungsanleitung Toshiba TD-Z471 (Seite 13 von 76) (Englisch)

562486

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Introduction

Wireless Remote Control

1 POWER button—Switches the power on/off.

When the Power indicator is not glowing, no controls

will work.

2 INPUT buttons—Select the input signal from

[HDMI1], [HDMI2], [DVI-D], [D-SUB],

[OPTION]*, [DISPLAYPORT], [YPbPr],

[S-VIDEO], and [VIDEO].

OPTION can be used when an expansion module is

mounted on the option slot.

3 PICTURE MODE button—Selects the picture

mode from [HIGHBRIGHT], [STANDARD],

[sRGB], and [CINEMA]. See page 40.

HIGHBRIGHT: The brightness is maximized.

STANDARD: Factory default setting.

sRGB: Suitable for color matching with

sRGBcompliant devices.

CINEMA: Suitable for viewing movies.

4 DISPLAY button—Displays the screen information.

See page 65. When the remote control mode is LOCK,

you can set it back to NORMAL by holding down the

DISPLAY button for at least 5 seconds (see page 62).

5 SET button—Accepts the settings made in the OSD

menu.

6 MINUS button (-)—Acts as (-) button to decrease the

adjustment in the OSD menu.

When the PIP mode is active, this button moves the

sub picture to the left.

7 AUTO SETUP button—Displays the auto setup

menu. See pages 39 and 57.

8 AUDIO INPUT buttons—Selects the audio input

according to the video input.

This button works only while any of HDMI1,

HDMI2, OPTION (OPS-compliant computer), or

DISPLAYPORT video input is selected. See page 66.

9 PIP (Picture-In-Picture) buttons—

ON/OFF button: Switches the PIP or POP mode on/

off.

INPUT button: Selects video to be displayed in the

sub picture.

CHANGE button: Changes the main picture with the

sub picture.

[Description]

PIP: Picture-In-Picture

The sub picture is displayed within the main picture.

POP: Picture-Outside-Picture

The sub picture is displayed to the bottom right of the

main picture.

SBS: Side-By-Side

The main picture and the sub picture are displayed

side by side.

When the screen size is [CUSTOM] or [REAL], the

PIP and POP modes don’t work.

10 STILL button—

ON/OFF button: Switches the still picture mode on/

off.

CAPTURE button: Captures the new picture.

11 SIZE button—Selects the picture size from [FULL],

[NORMAL], [CUSTOM], [DYNAMIC], and

[REAL]. See page 64.

12 MENU button—Switches the OSD menu mode on/

off.

13 UP button (▲)—Acts as (▲) button to move the

highlighted area up to select an adjustment item in the

OSD menu. When the PIP mode is active, this button

moves the sub picture up.

14 PLUS button (+)—Acts as (+) button to increase the

adjustment in the OSD menu. When the PIP mode is

active, this button moves the sub picture to the right.

15 EXIT button—Displays the previous OSD menu.

16 DOWN button (▼)—Acts as (▲) button to move the

highlighted area down to select an adjustment item in

the OSD menu. When the PIP mode is active, this

button moves the sub picture down.

17 MUTE button—Switches the mute function on/off.

18 VOLUME buttons (VOL)—Pressing the plus (+)

side increases the audio output level. Pressing the

minus (-) side decreases the audio output level.

Wireless Remote Control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TD-Z471 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info