Bedienungsanleitung Toshiba tlp wx2200 (Seite 21 von 29) (Englisch)

214861

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Operations

■ The default setting menu

This menu shows placement status and other settings.

Default setting 1 menu

DescriptionItem

Set the time to wait for the power to be turned off after the last

operation is made with no input signal.

Set whether the input with signals is only selected or not.

Beep when operation is made.

Sets whether to turn on the power when the ON/STANDBY button is

pressed (Manual), or when the power cord is plugged in (Auto).

Sets the lamp power.

No signal

power off

Auto input

Beep

Power on

Lamp power

Manual Auto

On Off

Low Standard

Off (not turned off) 30 min.

Detailed description

[Auto input search]

[On]: Automatically searches the signals that

can be projected, and switches input

from the connected device that outputs

the video signals each time the INPUT

button is pressed. The input from the

connected device that outputs no video

signals is skipped.

[Off]: Displays the Input select menu.

Toggle with

buttons and press

button. (The input without signals can be

selected.)

[Power on]

Note that if [Power on] is set to [Auto], then if the power is supplied when restored

after a power outage, the projector will come on.

[Lamp power]

When [Lamp power] is set to [Low], the screen becomes a little darker, but the

cooling fan noise gets quieter.

Using the menus (Continued)

Computer 1

Y/P

Computer 2

Y/P

Video

S-video

Input select

/ shows whether signal is

input or not.

Input select menu

How to register user logo

Select [User logo] in the Display setting menu, and press the

or button.

Select <Logo registration> from the displayed menu list and

press the

button.

The registration area is displayed for confirmation. Select [OK]

or [Cancel] and press the

button.

• If the registered picture does not fall within the display area, operate the

computer to scroll the screen.

Select [Yes] to register and press the

button.

Registration starts.

•A message is displayed while registration is in process.

Notes

•You can register a logo from computer input only.

• The area that can be registered is 640 × 400 dots at the center of the screen. To

• Only one logo can be registered. When a new image is registered, the old one is

erased.

• The time needed to register or display the image varies depending on the data size.

• If you use this function on commercial video software, broadcast or cable-

broadcasting except for the purpose of your private viewing and listening, it may

infringe the copyright protected by the copyright laws.

Select the size of the registered logo.

: Displays the registered image in original size at center of the screen.

: Displays the registered image by enlarging fully in the screen.

(As processed digitally, the image quality is degraded.)

Sets background color when [Center] is selected for the logo [Display style].

You can preview the registered logo.

You can reset the registered logo, display style and background to the factory

setting. (The logo set for the start-up screen and background is reset.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp wx2200 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info