Bedienungsanleitung Toshiba tlp x100 (Seite 15 von 29) (Englisch)

215803

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Operations

Precautions

Lamp characteristics may rarely cause the brightness to ﬂuctuate slightly.

The LCD panel is made using extremely advanced technology. There may be black spots

(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. These

are intrinsic characteristics of the technology and are not malfunctions.

Notes

A lamp is consumable item. If used for extended periods, images will appear dark, and

the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The

lifetime of the lamp depends on conditions of use.)

Although this projector supports a wide range of RGB signals

p.53

, any resolutions

not supported by this projector (XGA for X100, WXGA for WX100) will be expanded

or shrunk, which will affect image quality slightly. To view high-quality images, set the

computer’s external output to XGA for X100 and WXGA for WX100.

With some models of computer having LCD displays or the like, displaying images

simultaneously on the projector and the monitor’s display may prevent the images from

displaying properly. If this happens, turn off the computer’s LCD display. For information

on how to turn off the LCD display, see the computer’s owner’s manual.

If no signal is being input from the connected equipment or signal input is stopped while

projecting, the “No signal” message will appear.

If a signal not supported by the projector is input, the “Unsupported signal” message

will appear.

If an unavailable operation button is pressed, the icon will appear with a beep sound

(if the beep sound is set to [On]).

Moving pictures played back on computers using DVD software may appear unnatural

when projected with this projector. However, it is not a malfunction of the projector.

•

Using handy features

Using auto setting (For computer input only)

This function automatically sets up the projector to the optimum state. It

sets up sampling phase, frequency and screen position, for each type

of the input signal by using simple operations.

Press the remote control’s AUTO SET button.

The icon will appear during processing.

You can set as well by selecting [Auto setting] in the Image

adjustment menu

p.35

Notes

The image may not be projected or auto adjustment/setting may not be performed

correctly for input signals other than those supported by the projector

p.53

p.54

If auto setting fails adjustment, adjust manually with [Position] in the Image

adjustment menu

p.35

Correcting the keystone distortion

When the projector placement angle against the screen is changed while projecting the

image, the picture will undergo keystone (trapezoidal) distortion.

This projector is capable of correcting this keystone distortion.

Before correction

After correction

The keystone distortion will be corrected automatically based on the projector’s

placement angle.

Adjusting Keystone distortion Manually

Use the buttons for keystone adjustment.

Notes

Depending on the amount of keystone adjustment

and the content of images, some information may

be lost, or the picture quality may suffer.

Even if [Auto keystone] is set to [On], keystone

distortion can be adjusted manually. Note that if

you change the position or angle of the projector,

automatic keystone correction will be performed

again.

When [Auto keystone] is set to [On], the automatic keystone correction will be

performed each time the power is turned on.

The keystone correction settings are memorized after the power has been turned off.

Therefore, it is recommended that you set [Auto keystone] to [Off], if the case is that

the projector placement angle against the screen remains unchanged and you do not

wish to change the keystone adjustment that you set.



•



•

Remote

control

Control panel

Remote

control

Basic operations (Continued)

LCD Panels

LCD panels wear out. In order to prolong the lifetime of your LCD panel, take the

following precautions.

• In order to extend the lifetime of the LCD panel, always turn off the power when not in

use, and make sure that the lamp is off. Keeping the lamp off is also very effective at

saving electricity.

• If the air ﬁlter becomes dirty and clogged, the projector’s internal temperature will

rise, shortening the lifetime of the LCD panel and causing malfunctions. Clean the air

ﬁlter from time to time

p.47

, and replace it periodically. Contact the store where you

purchased your projector, or your local Service Station for replacement air ﬁlters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp x100 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba tlp x100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info