Bedienungsanleitung Toshiba tlp x100 (Seite 17 von 29) (Englisch)

215803

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Operations

Freezing the image (Freeze)

The projected image can be frozen. This function is to be used to pause

a video during a presentation, etc.

Press the remote control’s FREEZE button.

The picture pauses. (The Freeze function is released by pressing

the FREEZE button again.)

Notes

The icon will appear while freeze is in effect.

Other operations will also release the freeze.

Even if an image is frozen on the projector, the pictures are running

on the video or other equipment.

If you use this function on commercial video software, broadcast

or cable-broadcasting except for the purpose of your private

viewing and listening, it may infringe the copyright protected by the

Setting the password

How to change password

The default password is 000000.

Select [Password] in the Default setting 2 menu and press the or

button.

Select [Password registration] in the password registration, setting

menu, and press the button.

The password entry screen is displayed.

Enter the current password (6-digit number) using numeric keys of the

remote control.

Enter [000000] (6 zeros) for the ﬁrst change.

The password is not displayed. Instead it appears as [******].

Enter a new password (6-digit number).

Re-enter the same password for conﬁrmation.

Note

Please do not forget your password. If you forget the password, you can not

release the password by yourself.

In such a case, please inquire your dealer.

•



•



•

Remote

control

How to set password (from [Off] to [On])

Select [Password] in the Default setting 2 menu and press the or

button.

Select [Password setting] next, and press the

button.

Select [On].

Select [OK] and press the

button.

The password entry screen is displayed.

Enter the password using numeric keys of the remote control.

The password setting will be set as [On].

How to operate when password is [On]

Turn on the power.

The lamp lights and the password entry screen appears.

Enter the password using numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector

goes into normal operation. If the password is wrong, a message appears to prompt

you to re-enter the password, and again the password entry screen is displayed. If

you enter a wrong password for more than 5 times, the projector will automatically

power off and enter standby mode.

Note

When the password setting is [On], the password function will be enabled only

when the projector is restarted after the power cord has been unplugged.

The password that you set will not be enabled when restarting from standby mode

without unplugging the power cord.

How to set password (from [On] to [Off])

Select [Password] in the Default setting 2 menu and press the or

button.

The password entry screen is displayed.

Enter the password using numeric keys of the remote control.

Select [Password setting] next, and press the

button.

Select [OFF].

Select [OK] and press the

button.

•

Using handy features (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tlp x100 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba tlp x100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info