603737
94
Zoom out
Zoom in
Vorherige Seite
1/106
Nächste Seite
94
Skipped
stitches
The needle is incorrectly installed. Correctly install the needle. 24
The needle is bent. Replace the needle. 23, 24
The needle and thread are not suitable
for the fabric.
Sew with a needle and thread suitable
for the fabric.
52, 73
The upper thread is incorrectly
threaded.
Correctly thread the upper thread. 34
Stabilizer is not used in OEKAKI mode. Attach stabilizer. 78
Fabric wrinkles/
puckers
The upper thread tension is too tight. Adjust the upper thread tension. 88
The upper and lower threads are
incorrectly threaded.
Correctly thread the upper and lower
threads.
32, 34
The needle is too thick for the fabric. Use a needle suitable for the fabric. 52, 73
The needle is burred or bent. Replace the needle. 24
Stretch fabric is being sewn. Use the ball point needle.
Select a stitch and feed suitable for
stretch fabric.
48
Stabilizer is not used in OEKAKI mode. Attach stabilizer, especially with thin or
stretch fabrics, fabrics with a coarse
weave, or fabrics that often cause
pattern shrinkage.
78
Too much
lower thread
showing on
right side of the
fabric
The lower thread is incorrectly threaded. Correctly thread the lower thread. 32
The upper thread tension is too tight. Adjust the upper thread tension. 88
The bobbin is not correctly inserted in
the bobbin case.
Correctly insert the bobbin in the
bobbin case.
32
The specially designed bobbin is not
being used.
Use a specially designed bobbin. 7
A metal bobbin is being used.
Too much
upper thread
showing on
wrong side of
the fabric
The upper and lower threads are
incorrectly threaded.
Correctly thread the upper and lower
threads.
32, 34
The tension of the upper thread is too
loose
Adjust the upper thread tension. 88
The upper thread is incorrectly
threaded.
(not threaded through the thread guide)
Correctly thread the upper thread. 34
Thread
entangled
under fabric
The thread has come out of the take-up
lever.
Raise the presser foot, and then
correctly thread the sewing machine.
34
The upper thread is incorrectly
threaded.
The lower thread has come out of the
groove in the bobbin case.
Correctly thread the lower thread. 32
Trouble Cause Countermeasure Page
94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toyota OEKAKI50R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toyota OEKAKI50R

Toyota OEKAKI50R Bedienungsanleitung - Deutsch - 106 seiten

Toyota OEKAKI50R Bedienungsanleitung - Holländisch - 106 seiten

Toyota OEKAKI50R Bedienungsanleitung - Französisch - 106 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info