603737
96
Zoom out
Zoom in
Vorherige Seite
1/106
Nächste Seite
96
When an error code appears
If an incorrect operation was performed, an error code between F1 and F9 appears in the LED display. Try again
with the correct procedure.
LED display Cause Countermeasure
F1
This appears and the sewing machine
stops when the motor is being overloaded,
for example, when the fabric is too thick.
Try again with fabric of a suitable
thickness.
F2
This appears when the sewing machine is
started with the start/stop button or the foot
controller while the presser foot is raised.
Lower the presser foot lever.
F3
This appears when the buttonhole lever is
not lowered to the buttonhole foot even
though a buttonhole stitch is selected.
Lower the buttonhole lever to the
buttonhole foot.
F4
This appears when a stitch other than a
buttonhole stitch is selected and the
buttonhole lever has been lowered and the
buttonhole foot is still attached.
Replace the presser foot to one suitable for
the stitch, and then raise the buttonhole
lever.
F5
This appears and the sewing machine
suddenly stops when the foot controller
connector is plugged into the jack while the
sewing machine is running.
With the sewing machine stopped, plug the
foot controller connector into the jack.
F6
This appears and the sewing machine
suddenly stops when the foot controller
connector is unplugged from the jack while
the sewing machine is running.
With the sewing machine stopped, unplug
the foot controller connector from the jack.
F7
This appears and the sewing machine
suddenly stops when the thread winding
spindle is slid to the right while the sewing
machine is running.
Return the thread winding spindle to the
standby position (left).
F8
This appears and the sewing machine
suddenly stops when the thread winding
spindle is slid to the left while the bobbin is
being wound.
Move the thread winding spindle while the
sewing machine is stopped.
96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toyota OEKAKI50R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toyota OEKAKI50R

Toyota OEKAKI50R Bedienungsanleitung - Deutsch - 106 seiten

Toyota OEKAKI50R Bedienungsanleitung - Holländisch - 106 seiten

Toyota OEKAKI50R Bedienungsanleitung - Französisch - 106 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info