19
6.3. Connecting to TV
Connect the provided AV cable to the TV-Out connection on the rear of
the camera. The yellow connector is plugged into the Video input socket
(yellow) on the TV and the white connector into the Audio input (white).
Depending on the respective TV standard, the output signal should be set to
PAL or NTSC in the systems settings.
Switch on the camera. After several seconds the red and blue LED indicators
will light up simultaneously and the last photo or video appears on the TV.
Use the “Up” and “Down” buttons to search through the fi les. As soon
as a video camera symbol appears in the top right corner this indicates that
the fi le is a video fi le. Upon pressing the confi rmation key the video is
played back.
Briefl y press the Enter key to start a slideshow of the photos. The camera
then displays an image for 5 seconds before changing to the next image.
When watching a video this is played back directly.
Press the Enter key again to stop a running slideshow.
To exit the TV mode press the On/Off button .
Note:
• When playing back a large video fi le a delay of up to one minute can occur.
