Bedienungsanleitung Trek eBike Systems 2023 - Bosch (Seite 325 von 376) (Deutsch, Englisch, Holländisch, Französisch)

817492

325

Zoom out

Zoom in

Vorherige Seite

1/376

Nächste Seite

English – 3

If at least one (but not all) of the LEDs on the battery charge

indicator (3) lights up, the eBike battery will need to be fully

charged before using it for the first time.

uDo not charge or use eBike batteries if they are dam-

aged. Contact an authorised bicycle dealer.

Charging the eBike Battery

uA Bosch eBike battery must only be charged using an

original Bosch eBike charger.

Note: The eBike battery is supplied partially charged. To en-

sure full capacity of the eBike battery, fully charge the bat-

tery in the charger before using it for the first time.

To charge the eBike battery, read and follow the instructions

in the operating manual for the charger.

The eBike battery can be charged at any state of charge. In-

terrupting the charging process does not damage the eBike

battery.

The eBike battery has a temperature monitoring function

that only allows it to be charged within a temperature range

of 0°C to 40°C.

If the temperature of the

eBike battery is outside this

charging range, three of the

LEDs on the battery charge

indicator (3) will flash. Dis-

connect the eBike battery

from the charger and let it

reach the correct temperat-

ure range.

Do not reconnect the eBike battery to the charger until it has

reached the correct charging temperature.

Battery charge indicator outside of the eBike

The five LEDs on the battery charge indicator(3) indicate

the battery's state of charge when the eBike battery is

switched on.

Each LED represents approximately 20% of the charging ca-

pacity. When the eBike battery is fully charged, all five LEDs

will be lit.

The eBike battery's state of charge when switched on is also

shown on the display of the on-board computer. Read and

follow the instructions in the operating manuals for the drive

unit and on-board computer.

If the eBike battery's capacity is less than 10%, the last re-

maining LED will flash.

If the eBike battery capacity is less than 5%, all the LEDs on

the battery charge indicator (3) on the eBike battery will go

out. The display function of the on-board computer, how-

ever, will carry on working.

Once charging is complete, disconnect the eBike battery

from the charger and the charger from the mains.

Using Two eBike Batteries for One eBike

(optional)

The manufacturer can also equip an eBike with two eBike

batteries. In this case, one of the charging sockets will not be

accessible or it will have been sealed with a sealing cap by

the bicycle manufacturer. Only charge the eBike batteries

via the charging socket that is accessible.

uNever open charging sockets that have been sealed by

the manufacturer. Charging batteries via a charging

socket that used to be sealed may cause irreparable dam-

age.

If you want to use an eBike that is designed for two eBike

batteries with only one e-Bike battery, cover the contacts of

the unused socket using the cover (10) provided. Otherwise

there is a risk that the exposed contacts will cause a short

circuit (see figuresA and B).

Charging Process for Two eBike Batteries

If two eBike batteries are fitted to an eBike, both eBike bat-

teries can be charged using the uncovered connection. To

begin with, both eBike batteries are charged one after the

other until they reach approx.80–90% capacity, then they

are both fully charged at the same time (the LEDs flash on

both eBike batteries).

When the eBike is in operation, power is drawn from both

eBike batteries on an alternating basis.

If you take the eBike batteries out of the holders, you can

charge each one individually.

Charging With One eBike Battery Fitted

If only one eBike battery is fitted, you can only charge the

eBike battery that has the accessible charging socket on the

bike. You can only charge the eBike battery with the sealed

charging socket if you take the eBike battery out of the

holder.

Inserting and Removing the eBike Battery

uWhen inserting the battery into the holder or remov-

ing it from the holder, always switch off the eBike bat-

tery and the eBike beforehand.

uOnce you have inserted the eBike battery, check that

it is correctly positioned and secure in all directions.

Inserting and removing the standard battery (see

figureA)

In order for the battery to be inserted, the key (5) must be

inserted into the lock (6) and the lock must be open.

To insert the standard battery (8), place it onto the con-

tacts on the lower holder (9) on the eBike (the battery can

be titled towards the frame by up to 7°). Twist it into the up-

per holder(7) as far as possible until you hear it click into

place.

Always secure the eBike battery by closing the lock (6) –

otherwise the lock may open and the eBike battery may fall

out of the holder.

Always remove the key (5) from the lock (6) after closing it.

This prevents both the key from falling out and the eBike bat-

tery from being removed by unauthorised third parties when

the eBike is not in use.

To remove the standard battery (8), switch it off and open

the lock using the key (5). Tilt the eBike battery out of the

upper holder(7) and pull it out of the lower holder(9).

Bosch eBike Systems 0 275 007 XPX | (22.02.2023)

325

Trek eBike Systems 2023 - Bosch Seite 325

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info