Bedienungsanleitung Trendnet TEW-716BRG (Seite 26 von 43) (Englisch)

541686

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

TRENDnet User’s Guide

TEW-716BRG

Example: To forward TCP port 80 to your IP camera

1. Setup DynDNS service (See DynDNS section).

2. Access TRENDnet IP Camera management page and forward Port 80 (see product

documentation)

3. Make sure to configure your network/IP camera to use a static IP address or you can

use the DHCP reservation feature (see “

Set up DHCP reservation” on page 21).

Note: You may need to reference your camera documentation on configuring a

static IP address.

4. Log into your router management page (see “

Access your router management page”

on page 18).

5. Click on Forwarding Rules, and click on Virtual Server.

6. Enter 80 under Service Port.

7. Next to Server IP, enter the IP address assigned to the camera. (e.g.

192.168.10.101)Next to Name, you can enter another name for the virtual server,

otherwise, leave the default name.

8. Select Enable to apply settings

9. To save the changes, click Save.

Special Applications

Forwarding Rules > Special AP

Special applications (also called port triggering) is typically used for online gaming

applications or communication applications that require a range of ports or several

ports to be dynamically opened on request to a device on your network. The router will

wait for a request on a specific port or range of ports (or trigger port/port range) from a

device on your network and once a request is detected by your router, the router will

forward a single port or multiple ports (or incoming port/port range) to the device on

your network. This feature is not typically used as most devices and routers currently

use UPnP (Universal Plug and Play) to automatically configure your router to allow

access for applications. See “

Enable/disable UPnP on your router” on page 21.

Note: Please refer to the device documentation to determine if your device

supports UPnP first, before configuring this feature.

1. Log into your router management page (see “Access your router management page”

on page 18).

2. Click on Access, and click on Special AP.

3. Review the special application settings.

• Trigger – Port or port range requested by the device.

Note: Please refer to the device documentation to determine which ports and

protocols are required.

• Incoming – Port(s) forwarded to the device.

o Port Range – Enter the ports or port range to be forwarded to the device.

(e.g. 2000-2038,2069,2081,2200-2210).

Note: Please refer to the device documentation to determine which ports and

protocols are required.

• Enabled – Selecting Enabled turns on the special application and selecting Disabled

turns it off.

Note: To simplify configuration, there is a list of commonly used pre-defined special

application entries to modify, otherwise, you can choose to manually add a new

special application.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-716BRG Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-716BRG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info