Bedienungsanleitung Trendnet TEW-716BRG (Seite 25 von 43) (Englisch)

541686

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

TRENDnet User’s Guide

TEW-716BRG

It is strongly recommended to use Virtual Server (also called port forwarding, see

“

Virtual Server” on page 24) to allow access to your computers or network devices from

the Internet.

1. Make the computer or network device (for which you are establishing a DMZ link) has

a static IP address (or you can use the DHCP reservation feature to ensure the device

has a fixed IP address) (see “

Set up DHCP reservation” on page 21).

A. Signing up for a Dynamic DNS service (outlined in the DDNS section) will

provide identification of the router’s network from the Internet.

2. Log into your router management page (see “

Access your router management page”

on page 18).

3. Click on Forwarding Rules and click on Miscellaneous.

4. Next to DMZ Enable, click Enabled.

5. Next to DMZ Host IP, enter the IP address you assigned to the computer or network

device to expose to the Internet.

6. To save changes, click Apply.

Virtual Server

Forwarding Rules > Virtual Server

Virtual Server (also called port forwarding) allows you to define specific ports (used or

required by a specific application) and forward them to a single IP address (a computer

or device) on your network. Using this feature is more secure compared to using DMZ

(see

DMZ on page 23) in which DMZ forwards all ports instead of only specific ports

used by an application. An example would be forwarding a port to an IP camera

(TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on

your network to be able to view it over the Internet.

Since most ISPs constantly change your home IP address, to be able to access the Virtual

Server port(s) from the Internet it is recommended to setup Dynamic DNS service (See

DynDNS section).

1. Log into your router management page (see “

Access your router management page”

on page 18).

2. Click on Forwarding Rules, and click on Virtual Server.

To simplify configuration, there is a list of commonly used pre-defined virtual server

entries to modify, otherwise, you can choose to manually add a new virtual server.

3. Review the virtual server settings, click Save button to apply settings.

• Service Port: Enter the port number required by your device. Refer to the

connecting device’s documentation for reference to the network port(s) required.

• Server IP: Enter the IP address of the device to forward the port (e.g.

192.168.10.101).

Note: You should assign a static IP address to the device or use DHCP

reservation to ensure the IP address of the device does not change.

• Enabled – Selecting Enabled turns on the virtual server and selecting Disabled

turns off the virtual server.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-716BRG Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-716BRG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info