Bedienungsanleitung Trendnet TEW-716BRG (Seite 23 von 43) (Englisch)

541686

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

TRENDnet User’s Guide

TEW-716BRG

2. Click on Forwarding Rules and click on Miscellaneous.

3. Next to UPnP, click Enabled or Disabled to turn the feature on or off on your router.

Note: It is recommended to leave this setting enabled, otherwise, you may

encounter issues with applications that utilize UPnP in order allow the required

communication between your computers or devices and the Internet.

4. To save changes, click Apply.

Enable/disable DoS (Denial of Service) Prevention

Security Setting > Miscellaneous

To provide additional security, your router offers DoS (Denial of Service) attach

prevention to protect your network against well-known DoS attacks. You may want to

enable the DoS feature for additional network security.

1. Log into your router management page (see “

Access your router management page”

on page 18).

2. Click on Security Setting, and click on Miscellaneous.

3. To enable DoS prevention, next to DoS Attack Detection, check the Enable option.

4. To save changes, click Save at the bottom of the page.

Note: If you would like to discard the changes, click Undo before you click Save.

Allow/deny ping requests to your router from the Internet

Security Setting > Miscellaneous

To provide additional security, you may want to disable your router from responding to

ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is

network communication test to check if an device with IP address is alive or exists on

the network. By disabling this feature, you can conceal your router’s IP address and

existence on the Internet by denying responses to ping requests from the Internet.

1. Log into your router management page (see “Access your router management page”

on page 18).

2. Click on Security Setting, and click on Miscellaneous.

3. To deny ping requests from the Internet, next to Discard PING from WAN side, check

the Enable option.

4. To save changes, click Save at the bottom of the page.

Note: If you would like to discard the changes, click Undo before you click Save.

Identify your network on the Internet

Advanced Setting > Dynamic DNS

Since most ISPs constantly change your home IP address, providing access to devices on

your home or small office Local Area Network (such as IP Cameras) from the Internet

requires setting up a Dynamic DNS service and entering the parameters into this

management area. Dynamic DNS services allow your router to confirm its location to the

given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability

to provide a virtual fixed IP address for your network. This means that even though your

ISP is always changing your IP address, the Dynamic DNS service will be able to identify

your network using a fixed address—one that can be used to view home IP Camera and

other devices on your local area network.

Note: First, you will need to sign up for one of the DDNS service providers listed in

the Server Address drop-down list.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-716BRG Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-716BRG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info