Bedienungsanleitung Trendnet TEW-716BRG (Seite 35 von 43) (Englisch)

541686

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

TRENDnet User’s Guide

TEW-716BRG

5. Click Email Log Now to send an e-mail of the current router log using your email alert

settings.

Clicking View Log will bring you to log page (Configuration > Toolbox > System

Information). See the “View your router log” section.

Enable SNMP on your router

Advanced Setting > SNMP

SNMP (Simple Network Management Protocol) is a network management protocol used

to monitor (read) and/or manage (write) multiple network devices on a network. This

feature requires a preconfigured external SNMP server.

1. Log into your router management page (see “

Access your router management page”

on page 18).

2. Click on Configuration at the top of the page, click on Advanced Setting, and click on

SNMP.

3. Review the options for SNMP.

• Enable SNMP – Check the Local option to allow SNMP access on the router wired

LAN and wireless interfaces. Check the Remote option to allow SNMP access on the

router WAN (Internet) interface.

• Get Community – Enter the community name to match the settings with the

external SNMP server. This community will have SNMP read access only.

• Set Community – Enter the community name to match the settings with the

external SNMP server. This community will have SNMP write access.

• IP 1-4 – Enter up to four IP addresses of external SNMP servers. (e.g.

192.168.10.250)

• SNMP Version – Select the correct SNMP version to match the SNMP version of

your external SNMP server(s), V1 or V2c.

• WAN Access IP Address – You can specify a single IP address from the Internet to

allow to connect your router using SNMP. (optional)

Note: When allowing Remote SNMP access, leaving this setting blank will allow

access from any IP address from the Internet. It is recommended to specify an IP

address if allowing Remote SNMP access.

4. To save changes, click Save at the bottom of the page.

Note: If you would like to discard the changes, click Undo before you click Save.

Add static routes to your router

Advanced Setting > Routing

You may want set up your router to route computers or devices on your network to

other local networks through other routers. Generally, different networks can be

determined by the IP addressing assigned to those networks. Generally speaking and for

the case of an example, your network may have 192.168.10.x IP addressing and another

network may have 192.168.20.x IP addressing and because the IP addressing of these

two networks are different, they are separate networks. In order to communicate

between the two separate networks, routing needs to be configured. Below is an

example diagram where routing is needed for devices and computers on your network

to access the other network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-716BRG Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-716BRG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info