Bedienungsanleitung Trendnet TEW-732BR (Seite 25 von 48) (Englisch)

541578

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TRENDnet User’s Guide

TEW-732BR

1. Log into your router management page (see “Access your router management page”

on page 21).

2. Click on Main, and click on LAN & DHCP Server.

3. Enter the router IP address settings.

• IP Address: Enter the new router IP address. (e.g. 192.168.200.1)

• Subnet Mask: Enter the new router subnet mask.(e.g. 255.255.255.0)

Note: The DHCP address range will change automatically to your new router IP

address settings so you do not have to change the DHCP address range manually to

match your new router IP address settings.

4. To save changes, click Apply.

Note: You will need to access your router management page using your new router

IP address to access the router management page. (e.g. Instead of using the default

http://192.168.10.1 using your new router IP address will use the following format

using your new router IP address http://(new.router.ipaddress.here)

to access your

router management page.

Set up the DHCP server on your router

Main > LAN & DHCP Server

Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to

automatically assign an IP address to each computer or device on your network. The

DHCP server is enabled by default on your router. If you already have a DHCP server on

your network, or if you do not want to use your router as a DHCP server, you can disable

this setting. It is recommended to leave this setting enabled.

1. Log into your router management page (see “

Access your router management page”

on page 21).

2. Click on Main, and click on LAN & DHCP Server.

3. Review the DHCP Server settings.

• DHCP Server: Enable or Disable the DHCP server.

• Start IP: Changes the starting address for the DHCP server range. (e.g.

192.168.10.20)

• End IP: Changes the last address for the DHCP server range. (e.g. 192.168.10.30)

Note: The Start IP and End IP specify the range of IP addresses to automatically

assign to computers or devices on your network.

• Domain Name (Optional): Specifies a domain name to assign to computers or

devices. (e.g. trendnet.com)

• Lease Time: Click the drop-down list to select the lease time.

Note: The DHCP lease time is the amount of time a computer or device can keep an

IP address assigned by the DHCP server. When the lease time expires, the computer

or device will renew the IP address lease with the DHCP server, otherwise, if there is

no attempt to renew the lease, the DHCP server will reallocate the IP address to be

assigned to another computer or device.

4. To save changes, click Apply.

Dynamic DHCP List – You can view the list of active lease entries for computers or

devices that have been assigned IP addresses automatically from the DHCP server on

your router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-732BR Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-732BR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info