Bedienungsanleitung Trendnet TEW-732BR (Seite 26 von 48) (Englisch)

541578

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TRENDnet User’s Guide

TEW-732BR

Set up DHCP reservation

Main > LAN & DHCP Server

DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows

your router to assign a fixed IP address from the DHCP server IP address range to a

specific device on your network. Assigning a fixed IP address can allow you to easily

keep track of the IP addresses used on your network by your computers or devices for

future reference or configuration such as virtual server (also called port forwarding, see

“

Virtual Server” on page 28) or special applications (also called port triggering, see

“

Special Applications” on page 30).

1. Log into your router management page (see “

Access your router management page”

on page 21).

2. Click on Main, and click on LAN & DHCP Server.

3. Review the DHCP reservation settings.

• Static DHCP: Enable or Disable the DHCP reservation feature.

• Name: Enter a name for the reservation.

• IP Address: Enter the IP address to assign to the reservation. (e.g. 192.168.10.101)

Note: You cannot assign IP addresses outside of the DHCP range. The IP address is

required to be within the DHCP IP address range (Start IP & End IP).

• MAC Address: Enter the MAC (Media Access Control) address of the computer or

network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)

• Add: Saves the reservation.

Static DHCP List – You can view the list of reservations for computers or devices that

have been created in this list.

To modify an existing reservation, click on the entry in the Static DHCP list. When

selected, the entry will be highlighted.

• Update: Saves changes to an existing reservation.

• Delete: Removes an existing reservation.

• Cancel: Discards changes to existing reservation.

Enable/disable UPnP on your router

Management > Remote Management

UPnP (Universal Plug and Play) allows devices connected to a network to discover each

other and automatically open the connections or services for specific applications (e.g.

instant messenger, online gaming applications, etc.) UPnP is enabled on your router by

default to allow specific applications required by your computers or devices to allow

connections through your router as they are needed.

1. Log into your router management page (see “

Access your router management page”

on page 21).

2. Click on Management, and click on Remote Management.

3. Next to UPnP, click Enabled or Disabled to turn the feature on or off on your router.

Note: It is recommended to leave this setting enabled, otherwise, you may

encounter issues with applications that utilize UPnP in order allow the required

communication between your computers or devices and the Internet.

4. To save changes, click Apply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-732BR Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-732BR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info