Bedienungsanleitung Trendnet TEW-752DRU (Seite 22 von 58) (Englisch)

541579

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

TRENDnet User’s Guide

TEW-752DRU

Advanced wireless settings

Wireless > Advanced

These settings are advanced options that can be configured to change advanced

wireless broadcast specifications. It is recommended that these settings remain set to

their default values unless you are knowledgeable about the effects of changing these

values. Changing these settings incorrectly can degrade performance.

• Transmit Power: This setting allows you to adjust the wireless transmit power to a

lower setting. In busy wireless environments, lowering the transmit power may

improve better performance and connectivity and decrease interference with

neighboring wireless networks.

• Beacon Period: A beacon is a management frame used in wireless networks that

transmitted periodically to announce the presence and provide information about

the router’s wireless network. The interval is the amount time between each

beacon transmission.

Default Value: 100 milliseconds (range: 20-1000)

• Preamble Type: Select the option that works best for your installation. It may be

best to keep this option at its default setting.

o Short Preamble: Using a short guard interval can increase throughput. However,

it can also increase error rate in some installations, due to increased sensitivity to

radio-frequency reflections.

o Long Preamble: Using a long preamble can help to decrease the error rate in

wireless data transmission and receiving.

Access Control Filters

Access control basics

MAC Address Filters

Access > MAC Filters

Every network device has a unique, 12-digit MAC (Media Access Control) address. Using

MAC filters, you can allow or deny specific computers and other devices from using this

router’s wired or wireless network. You can enter up to 24 MAC address entries.

1. Log into your router management page (see “Access your router management page

”

on page 25).

2. Click on Access, click on MAC Filters.

3. Review the MAC Filter options, click Save Settings to save settings.

Click the Configuring MAC Filtering below drop-down list to choose the MAC filter

function.

• Turn MAC Filtering OFF: disables the MAC address filter.

• Turn MAC Filtering ON and ALLOW computers listed to access the network Only

Allow computers/devices with MAC addresses listed to access the router

management page and the Internet. Deny all others. Turn MAC Filtering ON and

DENY computers listed to access the network

Only Deny computers/devices with MAC addresses listed to access to the

router management page and the Internet. Allow all others.

Note: MAC filter can be configured to allow access to the listed MAC address and

deny all others unlisted or vice versa. The recommended function is to choose to

only allow access to the MAC addresses listed and deny all others unlisted because

it is easier to determine the MAC addresses of devices in your network then to

determine which MAC addresses you do not want to allow access.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-752DRU Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-752DRU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info