Bedienungsanleitung Trendnet TEW-810DR (Seite 29 von 59) (Englisch)

541408

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

TRENDnet User’s Guide

TEW-810DR

o Native IPv6 only: Native IPv6 refers to a network where IPv6 is the only transport

protocol.

o 6to4 + Native IPv6: Supports 6to4 and Native IPv6 simultaneously.

• LAN Network Prefix: Enter the LAN Network Prefix here. This can be based on ULA

(Unique Local Address).

• DNS server: IPv6 DNS address will be provided by your local ISP.

• 6to4 subnet ID: Specifies, in hexadecimal notation, a subnet ID other than 0

Prioritize traffic using QoS (Quality of Service)

Advanced > Setup > QoS

You may want to prioritize traffic for specific computers or devices on your network to

have higher priority. QoS involves prioritization of network traffic. QoS can be targeted

at a network interface, toward a given server or router's performance, or in terms of

specific applications.

1. Log into your router management page (see “Access your router management page

”

on page 15).

2. Click on the Advanced tab.

3. Click on the Setup section and click on IPv6 Setting.

4. Review the QoS settings. Click Apply to save your setting.

• Enable QoS: Enable or Disable the Quality of service through the router.

• Upload Bandwidth: Select your upload bandwidth on the pull down menu.

Advanced wireless settings

The advanced wireless features provide can provide you with additional options for

setting up your wireless network such as multiple SSID and WDS (Wireless Distribution

System) or wireless bridging.

Multiple SSID

Advanced > Wireless (2.4GHz or 5GHz) > Multiple SSID

The multiple SSID feature allows you to broadcast up to 2 additional SSIDs (or wireless

network names). When wireless devices are searching for available wireless networks to

connect to, the SSIDs (or wireless network names) will appear as separate and different

wireless networks. Since they appear as separate wireless networks, they are also

referred to as virtual APs (Access Points) since they appear as separate wireless access

points but are actually all being broadcasting and managed by a single wireless access

point. Each virtual AP can be configured each with a different SSID (or wireless network

name), security type and additional settings for wireless devices to connect. You can use

the multiple SSID feature to setup guest wireless accounts with a different security type

to keep your primary wireless network security information private. The diagram shows

an example of a client connecting to SSID 1 and another client connecting to SSID 2.

By default, your router functions in Access Point mode to allow wireless client devices to

connect and access your network resources and access the Internet using a single SSID.

The diagram shows an example of a client connecting to SSID 1 and another client

connecting to SSID 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-810DR Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-810DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info