Bedienungsanleitung Trendnet TEW-810DR (Seite 30 von 59) (Englisch)

541408

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

TRENDnet User’s Guide

TEW-810DR

To configure multiple SSID on your router:

1. Log into your router management page (see “Access your router management page

”

on page 16).

2. Click on the Advanced tab.

3. Select the wireless band you would like to configure Wireless 2.4GHz or Wireless

5GHz and click on Multiple SSID.

4. Review the Multiple SSID settings, click Apply when finished.

• Enabled: Check the option to enable the Guest Network. Select a schedule rule you

would like to apply to your wireless network. (See “Create Schedule

” section on

page 34) or select Always to have radio always on.

• Wireless Name (SSID): This acronym stands for Service Set Identifier and is the

name of your wireless network. It differentiates your wireless network from others

around you. It is recommended to use a different name from your primary wireless

network to a name that you can easily identify and differentiate from the primary.

You can reference your guests to access this network instead of the primary.

5. Under Security Policy, you can apply a different wireless security type and key to the

guest network. Please refer to

How to choose the type of security for your wireless

network page 11 to find out about different security types and Secure your wireless

network page 12 for wireless security configuration.

Note: You can repeat the steps to enable and configure additional SSIDs. You can

configure your wireless security settings for the additional SSIDs under Wireless

(2.4GHz or 5GHz)>Security. Under the Security Policy section, click the Wireless

Name (SSID) drop-down list to select the additional SSIDs to configure. Please refer

to page 15 to find out about different security types and page 16 for wireless

security configuration.

Wireless bridging using WDS (Wireless Distribution System)

Advanced > Wireless (2.4GHz or 5GHz) > WDS

Wireless bridging using WDS allows the device to create a wireless bridge with other

WDS supported wireless routers and access points configured in WDS mode to bridge

groups of network devices together wirelessly. Simultaneously, the router will also

function in access point mode allowing wireless client devices such as computers, game

consoles, mobile phones, etc. to connect in order to access network resources from

multiple groups of network devices as well as the Internet.

Note: You can create up to four WDS bridge connections on each wireless band

(2.4GHz and 5GHz). WDS (Wireless Distribution System) is not currently

standardized and may not connect to different model wireless routers or access

points, therefore, when using WDS, it is recommended to use the same model and

version for wireless bridging.

By default, your router functions in Access Point mode to allow wireless client devices to

connect and access your network resources and access the Internet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-810DR Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-810DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info