Bedienungsanleitung Trendnet TEW-810DR (Seite 32 von 59) (Englisch)

541408

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

TRENDnet User’s Guide

TEW-810DR

1. Log into your router management page (see “Access your router management page”

on page 15).

2. Click on the Advanced tab.

3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz

and click on Multiple SSID.

4. Review the Multiple SSID settings, click Apply when finished.

• Beacon Interval: A beacon is a management frame used in wireless networks that

transmitted periodically to announce the presence and provide information about

the router’s wireless network. The interval is the amount time between each

beacon transmission.

Default Value: 100 milliseconds (range: 25-1000)

• DTIM: A DTIM is a countdown informing clients of the next window for listening to

broadcast and multicast messages. When the wireless router has buffered

broadcast or multicast messages for associated clients, it sends the next DTIM with

a DTIM Interval value. Wireless clients detect the beacons and awaken to receive

the broadcast and multicast messages. The default value is 1. Valid settings are

between 1 and 255.

• Fragment Threshold: Wireless frames can be divided into smaller units (fragments)

to improve performance in the presence of RF interference and at the limits of RF

coverage. Fragmentation will occur when frame size in bytes is greater than the

Fragmentation Threshold. This setting should remain at its default value of 2346

bytes. Setting the Fragmentation value too low may result in poor performance.

• RTS Threshold: The Request To Send (RTS) function is part of the networking

protocol. A wireless device that needs to send data will send a RTS before sending

the data in question. The destination wireless device will send a response called

Clear to Send (CTS). The RTS Threshold defines the smallest data packet size

allowed to initiate the RTS/CTS function.

Default Value: 2347 (range: 1-2347)

• TX Power: Select the wireless transmit power of your wireless router.

• Short Preamble: Using a short (400ns) guard interval can increase throughput.

However, it can also increase error rate in some installations, due to increased

sensitivity to radio-frequency reflections. Select the option that works best for your

installation.

• Short Slot: Is the time the device waits before retransmitting a packet after a

collision.

• 20/40 Coexistence: Allows legacy wireless clients to connect to your wireless

network.

• Guard Interval: Allows distinct wireless packets to no interfere with each other.

• MCS: Modulation and coding scheme, defines the transmission rate of your wireless

router.

• Extension Channel: Allows you to select your wireless router’s extended channel

when higher wireless bandwidth is used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-810DR Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-810DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info