Bedienungsanleitung Triax dvb s 1 (Seite 39 von 47) (Deutsch, Englisch)

424674

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

These settings may need modifications if you use a specific LNB or a satellite antenna system that has

been installed with DiSEqC equipment (such as selector switches and / or motor antenna systems).

Please follow the instructions that come with this equipment or ask your dealer.

9.2 DiSEqC Setting (General Setting)

There is a DiSEqC option in the Main Menu. Please be sure to have selected the "DiSEqC 1.0" option as

long as you don't employ equipment according to "DiSEqC 1.2" or "USALS" standards. Changes can be

made using the buttons.

9.3 DiSEqC 1.0

In principle, there are two kinds of external DiSEqC switches on the market. One is for connection of two

LNBs, the other one is for connection of up to four LNBs. In the "Auto Search" sub menu you can select

the DiSEqC LNB input 1 / 2 / 3 or 4 for each LNB connected to the corresponding switch port of the

DiSEqC switch.

For details please follow the instructions that come with you DiSEqC equipment.

Select DiSEqC 1.2

select USALS

according to your needs. Then please proceed to the "Antenna

Positioner" sub menu in the "Main Menu".

To position the antenna using the DiSEqC 1.2 method,

you will need to set the movement limits first. The reason for this is

to reduce the danger of the antenna coming into contact with any

obstructing object during the antenna positioning operation.

When the movement limits are set, the antenna only moves within the limits specified.

9.4 Antenna Positioner / DiSEqC 1.2

The "Antenna Positioner" function of this receiver enables you to use a motorized antenna to view

multiple satellites. Most motor antennas can be controlled by DiSEqC 1.2 technology, some of them

also can be used for USALS. This convenient function locates the desired satellite if the latitude /

longitude of the receiving place and satellite longitude are known.

For setting up such a system it is needed to set the DiSEqC menu item in the

"General Settings" menu accordingly:

9. Advanced Operation

In this section some settings and operations are described that require certain expertise and basic

knowledge about satellite reception and digital TV for being carried out without fail. For most TV

viewers there should be no need to use, modify or adjust the items as described below.

In case of doubt please ask your dealer for support.

9.1 LNB Settings

This receiver has been factory-preset to the requirements of the most commonly used LNB types.

You can check or modify the actual settings in the menu "Channel Manager", sub menu "Auto

Search" or "Manual Search". In case you wish to edit the parameters using the "Auto Search" sub

menu, you need to press the GREEN button first. These are the preset items:

LNB Local Freq. Universal

DiSEqC OFF

22 kHz AUTO

0 / 12 V Control 0 V

DVB S1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax dvb s 1 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info