Bedienungsanleitung Triax dvb s 1 (Seite 41 von 47) (Deutsch, Englisch)

424674

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

DVB S1

9.6 Auto Search Function

Auto Search is the one used most frequently used methods of channel search. It is intended to

have the receiver automatically search all the channels from the satellite you selected.

Select "Auto Search" and then press the OK button.

Select the satellite using the OK button. If you want to

change the Satellite Information, press the GREEN button

on the remote control.

Set the LNB information and DiSEqC information for the

satellite. You can use the existing setting. To change the

setting, use the buttons.

You can select the transponder (TP) you want to use and

check the difference in signal strength and reception quality

from one transponder to another.

Set DiSEqC port to OFF (or to a port you want to use, if any)

Select the type of channels to search: FTA, Scrambled, ALL

or Network.

Start searching for TV and radio channels using the above

settings. Press the RED button.

TV and radio broadcast channels will be searched.

The names of the channels will be listed.

Press the EXIT button to return to viewing mode and check

whether the reception of the selected channel is good.

Note on Network Search:

In this search mode, the receiver first collects the network information first from the TP you

selected. Then an Auto Search takes place to research all the channels in that network. The

number of searched channels may vary, depending on the TPs present in that network. Select

whether to use the network information of the TP stream specified in "Select Transponder". I.e,

download the TP information of the satellite you want to find from a particular TP and then use

this to Auto Search the channels in the TP group. The number of channels searched may vary

depending on the TP information transmitted. Select Network Search and then use the

buttons to set it.

9.7 Manual Search Function

Use this channel search by entering the TP information manually to the receiver. This channel

search is often used to search for a particular channel or those channels that "Auto Search" has

missed, but it requires comparatively more expertise.

Select "Manual Search" and then press the OK button.

Select the satellite you want to track.

Set the LNB information and DiSEqC information for the

satellite. You can use the existing setting. To change the

setting, use the buttons.

Set the LNB polarization of the TP to "Horizontal" or

"Vertical".

After the settings are completed, select "Next" and then

press the OK button.

Set the Down Frequency of the TP.

Set the Symbol Rate of the TP.

Select the type of channels to search: FTA, Scrambled, ALL or Network.

Press the OK button to start searching using the above settings.

Another search method is "Advanced Search". Use this channel search to search for a

particular channel or channels ones that you couldn't find using "Manual Search". Enter the

PID of the channel you want to search.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax dvb s 1 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info