Bedienungsanleitung Triax DVB T1 Twin (Seite 39 von 47) (Deutsch, Englisch)

485389

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

The decimal point moves slowly along the front display and

indicates a recording is currently taking place.

Functions at the start time of a sheduled recording

Tuner A: The active broadcast continues unchanged.

All functions can be controlled with the remote control.

Tuner B: Signal is switched to the broadcast that is to be recorded.

No operational functions for the duration of the recording.

TV SCART: Video signal from Tuner A

VCR SCART: Video signal of the broadcast to be recorded from Tuner B.

Switches voltage to control recording with VCR (SCART pin 8).

Functions after pressing REC or during an Active Sheduled Recording

The decimal is moving slowly along the front display (recording indicator)

Tuner A:

All functions can be controlled with the remote control.

Tuner B: Receives the broadcast selected for recording.

No operational functions for the duration of the recording.

TV SCART: Video signal from Tuner A

VCR SCART: Video signal from Tuner B

Switching voltage to control recording with VCR (SCART pin 8).

The recording function of some VCRs can be controlled remotely with switching voltage. This is

transmitted via the SCART cable. In this case, the STB can switch the VCR on and off without

any further timer setting utilising the convenient EPG timer. Unfortunately not all VCRs provide

this functionality and often there is no information about this function available in the VCR's User

Manual.

In Europe, this device and an analogue VCR will generally be connected via a SCART-lead.

When connecting to an analogue VCR, use the socket VCR-SCART on this device. On the VCR,

use the SCART socket intended for connecting a TV set to it.

There are no additional connections between the VCR and the TV set required. In some cases

an additional connection might even have negative effects.

VCRs are equipped with tuning modules that aren't suitable for digital TV. The VCR must be set

up in such a way that it can record external video signals using the SCART socket. The

corresponding names for external video inputs of the VCR vary among manufacturers, usually

they are AV1, EXT 1, L 1, etc. We recommend you refer to the section "Recording from external

sources" in the users manual of the VCR.

If a videotape is played, the signal usually is fed through the STB to the TV set. The STB has to

be turned off (standby), whereas the TV set doesn't need to be switched in most cases. If the

STB is to be switched on later, the VCR has to be switched off (standby) first.

8.3 Information about Analogue Video Cassette Recorders (VCR)

VHS-VCRs have been around for nearly 2 decades in numerous different models with a wide

variety of different technical specifications and can be found in millions of households. Therefore

it's not possible to give detailed information about connection and operation or to describe how to

record digital TV broadcasts in detail due to the variety of the existing models.

Controlling VCR Recording Function

General Notes - Connection

DVB T1 TWIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax DVB T1 Twin Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info